Buy products

Extrusion

Extrusion
You can easily find the products you need by subcategories and using the navigation filter. Any product you want to download in PDF can be added by selecting it in the catalog.
Extrusion
View catalog
Selected 0 file to download
Extrusion
View PDF
Selected 0 file to download
Polyethylene
Brand
Segment
Processing Method
Areas of use
MFI (g/10 min)
Density (g/cm3)
Type of polymer
Special additives
Principal characteristics
Min flexural modulus (MPa)
Modulus of elasticity in bending, not less than, MPa
Flexible packaging;
Food products;
Industrial and shipping packaging;
Other goods;
Covering materials;
Silage and haylage films;
Greenhouses with film coating
Extrusion
Films for food-grade and non-food-grade packaging
2.0 (2.16 kg)
0.919
Low-density polyethylene (LDPE)
No additives
Basic polyethylene grade for film production
Flexible packaging;
Food products;
Other goods
Extrusion
Lamination of paper, cardboard, aluminum foil, for food-grade and non-food-grade packaging
7.0
0.918
Low-density polyethylene (LDPE)
No additives
Basic polyethylene grade for film production, coating at low application rates
Cable insulation;
Geosynthetics
Extrusion
Overlay of sheaths - точно нормальный перевод?, protective covers of cables by extrusion
0,30
0,921
LDPE Low-density polyethylene (LDPE)
Special formulation with enhanced thermal stability of the melt and increased resistance to thermal-oxidative degradation during product operation
The product is characterized by a special composition of the stabilization formula, which prevents the oxidation of the copper conductors of the product.
Cable insulation
Extrusion
Application of insulation, sheaths, protective covers of cables by extrusion
0.30
0.919–0.922
Low-density polyethylene (LDPE)
A special recipe with enhanced thermal stability of the melt and increased resistance to thermal oxidative degradation during the product use
The product is characterized by a special composition of the stabilization recipe, with increased thermal oxidative stability.
Cable insulation
Extrusion
Application of insulation, sheaths, protective covers of cables by extrusion
0.30
Low-density polyethylene (LDPE)
A special recipe with enhanced thermal stability of the melt and increased resistance to thermal oxidative degradation during the product use
The product is characterized by a special composition of the stabilization recipe, with increased thermal oxidative and photooxidative stability.
Flexible packaging;
Food products;
Industrial and shipping packaging;
Other goods;
Sleeves for grain storage;
Silage and haylage films;
Greenhouses with film coating
Extrusion
Shrink films, films for food-grade and non-food-grade packaging
0.30 (2.16 kg)
0.921
Low-density polyethylene (LDPE)
No additives
Basic polyethylene grade for film production
Flexible packaging;
Food products;
Industrial and shipping packaging;
Other goods;
Sleeves for grain storage;
Silage and haylage films;
Greenhouses with film coating
Extrusion
Shrink films, films for food-grade and non-food-grade packaging
0.30 (2.16 kg)
0.921
Low-density polyethylene (LDPE)
No additives
Basic polyethylene grade for film production
Flexible packaging;
Food products;
Industrial and shipping packaging;
Other goods;
Covering materials;
Silage and haylage films;
Greenhouses with film coating
Extrusion
Films for food-grade and non-food-grade packaging
2.0 (2.16 kg)
0.919
Low-density polyethylene (LDPE)
No additives
Basic grade for film production. Excellent compatibility with LLDPE
Flexible packaging;
Food products;
Industrial and shipping packaging;
Other goods;
Covering materials;
Silage and haylage films;
Greenhouses with film coating
Extrusion
Films for food-grade and non-food-grade packaging
2.0 (2.16 kg)
0.919
Low-density polyethylene (LDPE)
No additives
Basic polyethylene grade for film production
Cable insulation
Extrusion
Application of insulation, sheaths, protective covers of cables by extrusion
0.3–0.65
0.950–0.955
High-density polyethylene (HDPE)"
A special recipe with enhanced thermal stability of the melt and increased resistance to thermal oxidative degradation during the product use
The product is characterized by a special composition of the stabilization recipe, with increased thermal oxidative stability.
Geosynthetics
Extrusion
General-purpose pipes
0.30 (5 kg)
0.949
High-density polyethylene (HDPE)
Enhanced stabilization
A bimodal product of PE100 class. Long service life, high hydrolytic strength
1000
Pipes
Extrusion
Pressure pipes and fittings for domestic water supply and gas distribution networks
0,25 (5 kg)
0.959
High-density polyethylene (HDPE)
Enhanced stabilization, UV stabilizer
A bimodal product of PE100 class. Long service life, high hydrolytic strength. UV resistant.
1000
Pipes
Extrusion
Pressure pipes and fittings for an alternative method of laying according to PAS 1075 in domestic water supply and gas distribution networks
0.30 (5 kg)
0.959
High-density polyethylene (HDPE)
Enhanced stabilization, UV stabilizer
A bimodal product of PE100 class. Long service life, high hydrolytic strength. UV resistant. High resistance to crack propagation.
1000
Geosynthetics
Extrusion
Geosynthetic materials (geogrids, geomembranes, road construction sheets, construction sheets)
0.30 (2.16 kg)
0.958
High-density polyethylene (HDPE)
No additives
Bimodal grade. Balanced stress-strain properties, good processability and high resistance to cracking
Flexible packaging;
Other goods;
Sleeves for grain storage
Extrusion
Bags, packing, industrial packaging
10 (21.6 kg)
0.950
High-density polyethylene (HDPE)
Basic stabilization recipe
Extensive molecular weight distribution, high melt strength, high film tensile strength, puncture and tear resistance.
Geosynthetics;
Covering materials
Extrusion
Geosynthetic materials (geogrids, geomembranes, road construction sheets, construction sheets)
10 (21.6 kg)
0.950
High-density polyethylene (HDPE)
Basic stabilization recipe
Extensive molecular weight distribution, high melt strength, high film tensile strength, puncture and tear resistance.
Rigid packaging;
Industrial and shipping packaging
Extrusion
Vessels (canisters, containers, barrels) up to 227 L for aggressive substance storage
10 (21.6 kg)
0.953
High-density polyethylene (HDPE)
No additives
High molecular weight grade. Balanced stress-strain properties, high rigidity and resistance to cracking
Geosynthetics;
Covering materials
Extrusion
Geosynthetic materials (geogrids, geomembranes, road sheets, building sheets)
0.70 (5 kg)
0.946
High-density polyethylene (HDPE)
Enhanced stabilization recipe with a processing additive
Extensive molecular weight distribution, high melt strength, high film tensile strength, puncture and tear resistance.
Flexible packaging;
Industrial and shipping packaging;
Other goods;
Food products
Extrusion
Bags, packing, industrial packaging
0.70 (5 kg)
0.946
High-density polyethylene (HDPE)
Enhanced stabilization recipe with a processing additive
Extensive molecular weight distribution, high melt strength, high film tensile strength, puncture and tear resistance.
Geosynthetics
Extrusion
Geosynthetic materials (geogrids, geomembranes, road construction sheets, construction sheets)
0.50 (2.16 kg)
0.952
High-density polyethylene (HDPE)
No additives
High molecular weight grade. Balanced stress-strain properties.
Geosynthetics
Extrusion
Geosynthetic materials (geogrids, geomembranes, road sheets, building sheets)
0.53 (5 kg)
0.951
High-density polyethylene (HDPE)
Enhanced stabilization recipe with a processing additive
High resistance to cracking and stress-strain properties
Flexible packaging;
Industrial and shipping packaging;
Food products;
Other goods
Extrusion
Thin films (less than 10 microns), bags, packaging, industrial packaging. Available for use in a mixture with low-flow grades of low-density polyethylene in the recipes of shrink films, films for packaging heavy loads
0.53 (5 kg)
0.951
High-density polyethylene (HDPE)
Enhanced stabilization recipe with a processing additive
High resistance to cracking and stress-strain properties
Flexible packaging;
Food products;
Industrial and shipping packaging;
Other goods
Extrusion
Thin films (less than 10 microns), bags, packaging, industrial packaging. Available for use in a mixture with low-flow grades of low-density polyethylene in the recipes of shrink films, films for packaging heavy loads
8.0 (21.6 kg)
0.952
High-density polyethylene (HDPE)
Basic stabilization recipe
Bimodal grade. Improved balance of mechanical properties combined with good processability, high strength performance and stability of the film sleeve
Flexible packaging;
Food products;
Industrial and shipping packaging;
Other goods;
Silage and haylage films;
Greenhouses with film coating
Extrusion
Shrink films, films for food-grade and non-food-grade packaging
0.30 (2.16 kg)
0.926
Low-density polyethylene (LDPE)
No additives
A special grade with improved optical properties and tear resistance
Flexible packaging;
Food products;
Industrial and shipping packaging;
Other goods;
Silage and haylage films;
Greenhouses with film coating
Extrusion
Multilayer films for lamination, general purpose films
0.80 (2.16 kg)
0.923
Low-density polyethylene (LDPE)
No additives
A special grade with improved optical properties. Excellent compatibility with LLDPE
Flexible packaging;
Food products;
Industrial and shipping packaging;
Other goods;
Silage and haylage films;
Greenhouses with film coating
Extrusion
Films for food-grade and non-food-grade packaging
2.0 (2.16 kg)
0.926
Low-density polyethylene (LDPE)
No additives
A special grade with improved optical properties. Excellent compatibility with LLDPE
Flexible packaging;
Food products;
Other goods
Extrusion
Extrusion coating of paper, cardboard
4.0
0.920
Low-density polyethylene (LDPE)
No additives
A special grade for extrusion coatings enables the increase in the output (increase in the irrigation rate by 10–20%, reducing the consumption of irrigation material by 10–15%), stable watering at high speeds, low level of characteristic smoking, reduction in irrigation unevenness, low edge beating
Flexible packaging;
Food products
Extrusion
Highly transparent mono- and multilayer cast food-grade films (including sealed packaging)
4,0 (2,16 kg)
0,925
Low-density polyethylene (LDPE)
Antioxidant
Excellent optical properties, good processability
Flexible packaging;
Food products;
Other goods
Extrusion
Lamination of paper, cardboard, aluminum foil, for food-grade and non-food-grade packaging
5.0
0.921
Low-density polyethylene (LDPE)
No additives
Basic polyethylene grade for coating at high application rates. Reduced extractables. Improved rheological properties of products
Flexible packaging;
Food products;
Other goods
Extrusion
Lamination of paper, cardboard, aluminum foil, for food-grade and non-food-grade packaging
7.5
0.921
Low-density polyethylene (LDPE)
No additives
Basic polyethylene grade for coating at high application rates. Reduced extractables. Improved rheological properties of products
Flexible packaging;
Food products;
Industrial and shipping packaging;
Other goods;
Silage and haylage films
Extrusion
High-strength stretch film
3.0 (2.16 kg)
0.918
Linear low-density polyethylene (LLDPE)
Basic stabilization recipe with a processing additive
Basic grade, triple copolymer of ethylene with butene and hexene
Geosynthetics
Extrusion
Geomembranes
0.9 (2.16 kg)
0.920
Linear low-density polyethylene (LLDPE)
Basic stabilization recipe
Balanced combination of physicomechanical and optical properties. High strength performance, resistance to punctures, excellent weldability Excellent compatibility with LDPE
Flexible packaging;
Food products;
Covering materials;
Sleeves for grain storage;
Silage and haylage films;
Greenhouses with film coating
Extrusion
Films for food-grade and non-food-grade packaging, laminating films, coating films for sealing, industrial films, shopping bags and garbage bags
0.9 (2.16 kg)
0.920
Linear low-density polyethylene (LLDPE)
Basic stabilization recipe
Balanced combination of physicomechanical and optical properties. High strength performance, resistance to punctures, excellent weldability Excellent compatibility with LDPE
Geosynthetics
Extrusion
Geomembranes
2.0 (2.16 kg)
0.920
Linear low-density polyethylene (LLDPE)
Basic stabilization recipe
Balanced combination of physicomechanical and optical properties. High strength performance. Excellent compatibility with LDPE
Flexible packaging;
Food products;
Other goods;
Covering materials;
Silage and haylage films;
Greenhouses with film coating
Extrusion
General purpose packaging films, lamination films, sealable coating films, agricultural films, bags
2.0 (2.16 kg)
0.920
Linear low-density polyethylene (LLDPE)
Basic stabilization recipe
Balanced combination of physicomechanical and optical properties. High strength performance. Excellent compatibility with LDPE
Flexible packaging;
Food products;
Other goods;
Silage and haylage films;
Greenhouses with film coating
Extrusion
General purpose packaging films, lamination films, bags
2.0 (2.16 kg)
0.921
Linear low-density polyethylene (LLDPE)
Slip agent and anti-blocking additive
Improved physicomechanical and optical properties. High strength performance, excellent anti-blocking and slipping properties of the finished film products. Excellent compatibility with LDPE
Flexible packaging;
Food products;
Industrial and shipping packaging;
Other goods;
Covering materials;
Silage and haylage films
Extrusion
General purpose packaging films, lamination films, sealable coating films, agricultural films, bags
3.0 (2.16 kg)
0.919
Linear low-density polyethylene (LLDPE)
Basic stabilization recipe
Balanced combination of physicomechanical and optical properties. The properties and the structure of the polymer ensure high extrusion line performance
Flexible packaging;
Food products;
Industrial and shipping packaging;
Other goods;
Silage and haylage films
Extrusion
Cast films
3.0 (2.16 kg)
0.920
Linear low-density polyethylene (LLDPE)
Basic stabilization recipe with a processing additive
Basic grade for use both in pure form and in mixtures with LDPE and HDPE
Flexible packaging;
Food products;
Industrial and shipping packaging;
Other goods;
Sleeves for grain storage;
Silage and haylage films;
Polycarbonate greenhouses;
Greenhouses with film coating
Extrusion
Various film materials
1.0 (2.16 kg)
0.920
Metallocene LLDPE Linear low-density polyethylene (mLLDPE)
Basic stabilization recipe with a processing additive
Metallocene grade with increased puncture resistance
Flexible packaging;
Food products;
Industrial and shipping packaging;
Other goods;
Silage and haylage films;
Greenhouses with film coating
Extrusion
Cast films
3.0 (2.16 kg)
0.920
Metallocene LLDPE Linear low-density polyethylene (mLLDPE)
Basic stabilization recipe with a processing additive
Metallocene grade with increased puncture resistance
Pipes
Extrusion
Pressure intra-house pipes for water supply and underfloor heating
12.5 (at 21.6 kg)
0.938
High-density polyethylene (HDPE)
Enhanced stabilization
PE-RT Type 1 PE80 class product
Flexible packaging;
Food products;
Industrial and shipping packaging;
Other goods
Extrusion
High-strength sleeve and laminated film
1.0 (2.16 kg)
0.918
Linear low-density polyethylene (LLDPE)
Basic stabilization recipe with a processing additive
Basic grade, triple copolymer of ethylene with butene and hexene
Packaging for infusion solutions, blisters, polymer cans
Extrusion
Lamination of paper, cardboard, aluminum foil, for food-grade and non-food-grade packaging
7.5
0.921
Low-density polyethylene (LDPE)
No additives
Basic polyethylene grade for coating at high application rates. Reduced extractables. Improved rheological properties of products
Pipes
Extrusion
General-purpose pipes
8.5 (at 21.6 kg)
0.949
High-density polyethylene (HDPE)
Enhanced stabilization
A bimodal product similar to PE100. Long service life, high hydrolytic strength.
Geosynthetics
Extrusion
Pressure pipes and fittings for domestic water supply and gas distribution networks
0.18 (5 kg)
0.959
High-density polyethylene (HDPE)
Enhanced stabilization, UV stabilizer
A bimodal product of PE100 class. Long service life, high hydrolytic strength. UV resistant.
Flexible packaging;
Industrial and shipping packaging;
Other goods
Extrusion
Mono- and multilayer sleeve films, such as general purpose films, FFS films, agricultural films, consumer packaging films, bags
0.40 (2.16 kg)
0.935
РЕ
Basic stabilization recipe
Polymer compound containing 60% of the secondary fraction from consumer waste (PCR waste). The grade is characterized by high manufacturability. Color: transparent gray
Flexible packaging;
Transparent food-grade films;
Other goods
Extrusion
Shrink film, agricultural films, FFS films, films for consumer packaging
0.30 (2.16 kg)
0.925
РЕ
Basic stabilization recipe
Polymer compound containing 70% of the secondary fraction from consumer waste (PCR waste). The grade is characterized by high manufacturability. Color: transparent gray
Cable insulation
Extrusion
Outer sheath of power and telecommunications cables, outer coating of gas, oil and water pipelines
0.45-0.50
0.946-0.948
High-density polyethylene (HDPE)
The product is characterized by increased resistance to cracking, high strength and impact properties, as well as low temperature characteristics.
Segment
Flexible packaging;
Food products;
Industrial and shipping packaging;
Other goods;
Covering materials;
Silage and haylage films;
Greenhouses with film coating
Processing Method
Extrusion
Areas of use
Films for food-grade and non-food-grade packaging
MFI (g/10 min)
2.0 (2.16 kg)
Density (g/cm3)
0.919
Type of polymer
Low-density polyethylene (LDPE)
Special additives
No additives
Principal characteristics
Basic polyethylene grade for film production
Segment
Flexible packaging;
Food products;
Other goods
Processing Method
Extrusion
Areas of use
Lamination of paper, cardboard, aluminum foil, for food-grade and non-food-grade packaging
MFI (g/10 min)
7.0
Density (g/cm3)
0.918
Type of polymer
Low-density polyethylene (LDPE)
Special additives
No additives
Principal characteristics
Basic polyethylene grade for film production, coating at low application rates
Segment
Cable insulation;
Geosynthetics
Processing Method
Extrusion
Areas of use
Overlay of sheaths - точно нормальный перевод?, protective covers of cables by extrusion
MFI (g/10 min)
0,30
Density (g/cm3)
0,921
Type of polymer
LDPE Low-density polyethylene (LDPE)
Special additives
Special formulation with enhanced thermal stability of the melt and increased resistance to thermal-oxidative degradation during product operation
Principal characteristics
The product is characterized by a special composition of the stabilization formula, which prevents the oxidation of the copper conductors of the product.
Segment
Cable insulation
Processing Method
Extrusion
Areas of use
Application of insulation, sheaths, protective covers of cables by extrusion
MFI (g/10 min)
0.30
Density (g/cm3)
0.919–0.922
Type of polymer
Low-density polyethylene (LDPE)
Special additives
A special recipe with enhanced thermal stability of the melt and increased resistance to thermal oxidative degradation during the product use
Principal characteristics
The product is characterized by a special composition of the stabilization recipe, with increased thermal oxidative stability.
Segment
Cable insulation
Processing Method
Extrusion
Areas of use
Application of insulation, sheaths, protective covers of cables by extrusion
MFI (g/10 min)
0.30
Type of polymer
Low-density polyethylene (LDPE)
Special additives
A special recipe with enhanced thermal stability of the melt and increased resistance to thermal oxidative degradation during the product use
Principal characteristics
The product is characterized by a special composition of the stabilization recipe, with increased thermal oxidative and photooxidative stability.
Segment
Flexible packaging;
Food products;
Industrial and shipping packaging;
Other goods;
Sleeves for grain storage;
Silage and haylage films;
Greenhouses with film coating
Processing Method
Extrusion
Areas of use
Shrink films, films for food-grade and non-food-grade packaging
MFI (g/10 min)
0.30 (2.16 kg)
Density (g/cm3)
0.921
Type of polymer
Low-density polyethylene (LDPE)
Special additives
No additives
Principal characteristics
Basic polyethylene grade for film production
Segment
Flexible packaging;
Food products;
Industrial and shipping packaging;
Other goods;
Sleeves for grain storage;
Silage and haylage films;
Greenhouses with film coating
Processing Method
Extrusion
Areas of use
Shrink films, films for food-grade and non-food-grade packaging
MFI (g/10 min)
0.30 (2.16 kg)
Density (g/cm3)
0.921
Type of polymer
Low-density polyethylene (LDPE)
Special additives
No additives
Principal characteristics
Basic polyethylene grade for film production
Segment
Flexible packaging;
Food products;
Industrial and shipping packaging;
Other goods;
Covering materials;
Silage and haylage films;
Greenhouses with film coating
Processing Method
Extrusion
Areas of use
Films for food-grade and non-food-grade packaging
MFI (g/10 min)
2.0 (2.16 kg)
Density (g/cm3)
0.919
Type of polymer
Low-density polyethylene (LDPE)
Special additives
No additives
Principal characteristics
Basic grade for film production. Excellent compatibility with LLDPE
Segment
Flexible packaging;
Food products;
Industrial and shipping packaging;
Other goods;
Covering materials;
Silage and haylage films;
Greenhouses with film coating
Processing Method
Extrusion
Areas of use
Films for food-grade and non-food-grade packaging
MFI (g/10 min)
2.0 (2.16 kg)
Density (g/cm3)
0.919
Type of polymer
Low-density polyethylene (LDPE)
Special additives
No additives
Principal characteristics
Basic polyethylene grade for film production
Segment
Cable insulation
Processing Method
Extrusion
Areas of use
Application of insulation, sheaths, protective covers of cables by extrusion
MFI (g/10 min)
0.3–0.65
Density (g/cm3)
0.950–0.955
Type of polymer
High-density polyethylene (HDPE)"
Special additives
A special recipe with enhanced thermal stability of the melt and increased resistance to thermal oxidative degradation during the product use
Principal characteristics
The product is characterized by a special composition of the stabilization recipe, with increased thermal oxidative stability.
Segment
Geosynthetics
Processing Method
Extrusion
Areas of use
General-purpose pipes
MFI (g/10 min)
0.30 (5 kg)
Density (g/cm3)
0.949
Type of polymer
High-density polyethylene (HDPE)
Special additives
Enhanced stabilization
Principal characteristics
A bimodal product of PE100 class. Long service life, high hydrolytic strength
Min flexural modulus (MPa)
1000
Segment
Pipes
Processing Method
Extrusion
Areas of use
Pressure pipes and fittings for domestic water supply and gas distribution networks
MFI (g/10 min)
0,25 (5 kg)
Density (g/cm3)
0.959
Type of polymer
High-density polyethylene (HDPE)
Special additives
Enhanced stabilization, UV stabilizer
Principal characteristics
A bimodal product of PE100 class. Long service life, high hydrolytic strength. UV resistant.
Min flexural modulus (MPa)
1000
Segment
Pipes
Processing Method
Extrusion
Areas of use
Pressure pipes and fittings for an alternative method of laying according to PAS 1075 in domestic water supply and gas distribution networks
MFI (g/10 min)
0.30 (5 kg)
Density (g/cm3)
0.959
Type of polymer
High-density polyethylene (HDPE)
Special additives
Enhanced stabilization, UV stabilizer
Principal characteristics
A bimodal product of PE100 class. Long service life, high hydrolytic strength. UV resistant. High resistance to crack propagation.
Min flexural modulus (MPa)
1000
Segment
Geosynthetics
Processing Method
Extrusion
Areas of use
Geosynthetic materials (geogrids, geomembranes, road construction sheets, construction sheets)
MFI (g/10 min)
0.30 (2.16 kg)
Density (g/cm3)
0.958
Type of polymer
High-density polyethylene (HDPE)
Special additives
No additives
Principal characteristics
Bimodal grade. Balanced stress-strain properties, good processability and high resistance to cracking
Segment
Flexible packaging;
Other goods;
Sleeves for grain storage
Processing Method
Extrusion
Areas of use
Bags, packing, industrial packaging
MFI (g/10 min)
10 (21.6 kg)
Density (g/cm3)
0.950
Type of polymer
High-density polyethylene (HDPE)
Special additives
Basic stabilization recipe
Principal characteristics
Extensive molecular weight distribution, high melt strength, high film tensile strength, puncture and tear resistance.
Segment
Geosynthetics;
Covering materials
Processing Method
Extrusion
Areas of use
Geosynthetic materials (geogrids, geomembranes, road construction sheets, construction sheets)
MFI (g/10 min)
10 (21.6 kg)
Density (g/cm3)
0.950
Type of polymer
High-density polyethylene (HDPE)
Special additives
Basic stabilization recipe
Principal characteristics
Extensive molecular weight distribution, high melt strength, high film tensile strength, puncture and tear resistance.
Segment
Rigid packaging;
Industrial and shipping packaging
Processing Method
Extrusion
Areas of use
Vessels (canisters, containers, barrels) up to 227 L for aggressive substance storage
MFI (g/10 min)
10 (21.6 kg)
Density (g/cm3)
0.953
Type of polymer
High-density polyethylene (HDPE)
Special additives
No additives
Principal characteristics
High molecular weight grade. Balanced stress-strain properties, high rigidity and resistance to cracking
Segment
Geosynthetics;
Covering materials
Processing Method
Extrusion
Areas of use
Geosynthetic materials (geogrids, geomembranes, road sheets, building sheets)
MFI (g/10 min)
0.70 (5 kg)
Density (g/cm3)
0.946
Type of polymer
High-density polyethylene (HDPE)
Special additives
Enhanced stabilization recipe with a processing additive
Principal characteristics
Extensive molecular weight distribution, high melt strength, high film tensile strength, puncture and tear resistance.
Segment
Flexible packaging;
Industrial and shipping packaging;
Other goods;
Food products
Processing Method
Extrusion
Areas of use
Bags, packing, industrial packaging
MFI (g/10 min)
0.70 (5 kg)
Density (g/cm3)
0.946
Type of polymer
High-density polyethylene (HDPE)
Special additives
Enhanced stabilization recipe with a processing additive
Principal characteristics
Extensive molecular weight distribution, high melt strength, high film tensile strength, puncture and tear resistance.
Segment
Geosynthetics
Processing Method
Extrusion
Areas of use
Geosynthetic materials (geogrids, geomembranes, road construction sheets, construction sheets)
MFI (g/10 min)
0.50 (2.16 kg)
Density (g/cm3)
0.952
Type of polymer
High-density polyethylene (HDPE)
Special additives
No additives
Principal characteristics
High molecular weight grade. Balanced stress-strain properties.
Segment
Geosynthetics
Processing Method
Extrusion
Areas of use
Geosynthetic materials (geogrids, geomembranes, road sheets, building sheets)
MFI (g/10 min)
0.53 (5 kg)
Density (g/cm3)
0.951
Type of polymer
High-density polyethylene (HDPE)
Special additives
Enhanced stabilization recipe with a processing additive
Principal characteristics
High resistance to cracking and stress-strain properties
Segment
Flexible packaging;
Industrial and shipping packaging;
Food products;
Other goods
Processing Method
Extrusion
Areas of use
Thin films (less than 10 microns), bags, packaging, industrial packaging. Available for use in a mixture with low-flow grades of low-density polyethylene in the recipes of shrink films, films for packaging heavy loads
MFI (g/10 min)
0.53 (5 kg)
Density (g/cm3)
0.951
Type of polymer
High-density polyethylene (HDPE)
Special additives
Enhanced stabilization recipe with a processing additive
Principal characteristics
High resistance to cracking and stress-strain properties
Segment
Flexible packaging;
Food products;
Industrial and shipping packaging;
Other goods
Processing Method
Extrusion
Areas of use
Thin films (less than 10 microns), bags, packaging, industrial packaging. Available for use in a mixture with low-flow grades of low-density polyethylene in the recipes of shrink films, films for packaging heavy loads
MFI (g/10 min)
8.0 (21.6 kg)
Density (g/cm3)
0.952
Type of polymer
High-density polyethylene (HDPE)
Special additives
Basic stabilization recipe
Principal characteristics
Bimodal grade. Improved balance of mechanical properties combined with good processability, high strength performance and stability of the film sleeve
Segment
Flexible packaging;
Food products;
Industrial and shipping packaging;
Other goods;
Silage and haylage films;
Greenhouses with film coating
Processing Method
Extrusion
Areas of use
Shrink films, films for food-grade and non-food-grade packaging
MFI (g/10 min)
0.30 (2.16 kg)
Density (g/cm3)
0.926
Type of polymer
Low-density polyethylene (LDPE)
Special additives
No additives
Principal characteristics
A special grade with improved optical properties and tear resistance
Segment
Flexible packaging;
Food products;
Industrial and shipping packaging;
Other goods;
Silage and haylage films;
Greenhouses with film coating
Processing Method
Extrusion
Areas of use
Multilayer films for lamination, general purpose films
MFI (g/10 min)
0.80 (2.16 kg)
Density (g/cm3)
0.923
Type of polymer
Low-density polyethylene (LDPE)
Special additives
No additives
Principal characteristics
A special grade with improved optical properties. Excellent compatibility with LLDPE
Segment
Flexible packaging;
Food products;
Industrial and shipping packaging;
Other goods;
Silage and haylage films;
Greenhouses with film coating
Processing Method
Extrusion
Areas of use
Films for food-grade and non-food-grade packaging
MFI (g/10 min)
2.0 (2.16 kg)
Density (g/cm3)
0.926
Type of polymer
Low-density polyethylene (LDPE)
Special additives
No additives
Principal characteristics
A special grade with improved optical properties. Excellent compatibility with LLDPE
Segment
Flexible packaging;
Food products;
Other goods
Processing Method
Extrusion
Areas of use
Extrusion coating of paper, cardboard
MFI (g/10 min)
4.0
Density (g/cm3)
0.920
Type of polymer
Low-density polyethylene (LDPE)
Special additives
No additives
Principal characteristics
A special grade for extrusion coatings enables the increase in the output (increase in the irrigation rate by 10–20%, reducing the consumption of irrigation material by 10–15%), stable watering at high speeds, low level of characteristic smoking, reduction in irrigation unevenness, low edge beating
Segment
Flexible packaging;
Food products
Processing Method
Extrusion
Areas of use
Highly transparent mono- and multilayer cast food-grade films (including sealed packaging)
MFI (g/10 min)
4,0 (2,16 kg)
Density (g/cm3)
0,925
Type of polymer
Low-density polyethylene (LDPE)
Special additives
Antioxidant
Principal characteristics
Excellent optical properties, good processability
Segment
Flexible packaging;
Food products;
Other goods
Processing Method
Extrusion
Areas of use
Lamination of paper, cardboard, aluminum foil, for food-grade and non-food-grade packaging
MFI (g/10 min)
5.0
Density (g/cm3)
0.921
Type of polymer
Low-density polyethylene (LDPE)
Special additives
No additives
Principal characteristics
Basic polyethylene grade for coating at high application rates. Reduced extractables. Improved rheological properties of products
Segment
Flexible packaging;
Food products;
Other goods
Processing Method
Extrusion
Areas of use
Lamination of paper, cardboard, aluminum foil, for food-grade and non-food-grade packaging
MFI (g/10 min)
7.5
Density (g/cm3)
0.921
Type of polymer
Low-density polyethylene (LDPE)
Special additives
No additives
Principal characteristics
Basic polyethylene grade for coating at high application rates. Reduced extractables. Improved rheological properties of products
Segment
Flexible packaging;
Food products;
Industrial and shipping packaging;
Other goods;
Silage and haylage films
Processing Method
Extrusion
Areas of use
High-strength stretch film
MFI (g/10 min)
3.0 (2.16 kg)
Density (g/cm3)
0.918
Type of polymer
Linear low-density polyethylene (LLDPE)
Special additives
Basic stabilization recipe with a processing additive
Principal characteristics
Basic grade, triple copolymer of ethylene with butene and hexene
Segment
Geosynthetics
Processing Method
Extrusion
Areas of use
Geomembranes
MFI (g/10 min)
0.9 (2.16 kg)
Density (g/cm3)
0.920
Type of polymer
Linear low-density polyethylene (LLDPE)
Special additives
Basic stabilization recipe
Principal characteristics
Balanced combination of physicomechanical and optical properties. High strength performance, resistance to punctures, excellent weldability Excellent compatibility with LDPE
Segment
Flexible packaging;
Food products;
Covering materials;
Sleeves for grain storage;
Silage and haylage films;
Greenhouses with film coating
Processing Method
Extrusion
Areas of use
Films for food-grade and non-food-grade packaging, laminating films, coating films for sealing, industrial films, shopping bags and garbage bags
MFI (g/10 min)
0.9 (2.16 kg)
Density (g/cm3)
0.920
Type of polymer
Linear low-density polyethylene (LLDPE)
Special additives
Basic stabilization recipe
Principal characteristics
Balanced combination of physicomechanical and optical properties. High strength performance, resistance to punctures, excellent weldability Excellent compatibility with LDPE
Segment
Geosynthetics
Processing Method
Extrusion
Areas of use
Geomembranes
MFI (g/10 min)
2.0 (2.16 kg)
Density (g/cm3)
0.920
Type of polymer
Linear low-density polyethylene (LLDPE)
Special additives
Basic stabilization recipe
Principal characteristics
Balanced combination of physicomechanical and optical properties. High strength performance. Excellent compatibility with LDPE
Segment
Flexible packaging;
Food products;
Other goods;
Covering materials;
Silage and haylage films;
Greenhouses with film coating
Processing Method
Extrusion
Areas of use
General purpose packaging films, lamination films, sealable coating films, agricultural films, bags
MFI (g/10 min)
2.0 (2.16 kg)
Density (g/cm3)
0.920
Type of polymer
Linear low-density polyethylene (LLDPE)
Special additives
Basic stabilization recipe
Principal characteristics
Balanced combination of physicomechanical and optical properties. High strength performance. Excellent compatibility with LDPE
Segment
Flexible packaging;
Food products;
Other goods;
Silage and haylage films;
Greenhouses with film coating
Processing Method
Extrusion
Areas of use
General purpose packaging films, lamination films, bags
MFI (g/10 min)
2.0 (2.16 kg)
Density (g/cm3)
0.921
Type of polymer
Linear low-density polyethylene (LLDPE)
Special additives
Slip agent and anti-blocking additive
Principal characteristics
Improved physicomechanical and optical properties. High strength performance, excellent anti-blocking and slipping properties of the finished film products. Excellent compatibility with LDPE
Segment
Flexible packaging;
Food products;
Industrial and shipping packaging;
Other goods;
Covering materials;
Silage and haylage films
Processing Method
Extrusion
Areas of use
General purpose packaging films, lamination films, sealable coating films, agricultural films, bags
MFI (g/10 min)
3.0 (2.16 kg)
Density (g/cm3)
0.919
Type of polymer
Linear low-density polyethylene (LLDPE)
Special additives
Basic stabilization recipe
Principal characteristics
Balanced combination of physicomechanical and optical properties. The properties and the structure of the polymer ensure high extrusion line performance
Segment
Flexible packaging;
Food products;
Industrial and shipping packaging;
Other goods;
Silage and haylage films
Processing Method
Extrusion
Areas of use
Cast films
MFI (g/10 min)
3.0 (2.16 kg)
Density (g/cm3)
0.920
Type of polymer
Linear low-density polyethylene (LLDPE)
Special additives
Basic stabilization recipe with a processing additive
Principal characteristics
Basic grade for use both in pure form and in mixtures with LDPE and HDPE
Segment
Flexible packaging;
Food products;
Industrial and shipping packaging;
Other goods;
Sleeves for grain storage;
Silage and haylage films;
Polycarbonate greenhouses;
Greenhouses with film coating
Processing Method
Extrusion
Areas of use
Various film materials
MFI (g/10 min)
1.0 (2.16 kg)
Density (g/cm3)
0.920
Type of polymer
Metallocene LLDPE Linear low-density polyethylene (mLLDPE)
Special additives
Basic stabilization recipe with a processing additive
Principal characteristics
Metallocene grade with increased puncture resistance
Segment
Flexible packaging;
Food products;
Industrial and shipping packaging;
Other goods;
Silage and haylage films;
Greenhouses with film coating
Processing Method
Extrusion
Areas of use
Cast films
MFI (g/10 min)
3.0 (2.16 kg)
Density (g/cm3)
0.920
Type of polymer
Metallocene LLDPE Linear low-density polyethylene (mLLDPE)
Special additives
Basic stabilization recipe with a processing additive
Principal characteristics
Metallocene grade with increased puncture resistance
Segment
Pipes
Processing Method
Extrusion
Areas of use
Pressure intra-house pipes for water supply and underfloor heating
MFI (g/10 min)
12.5 (at 21.6 kg)
Density (g/cm3)
0.938
Type of polymer
High-density polyethylene (HDPE)
Special additives
Enhanced stabilization
Principal characteristics
PE-RT Type 1 PE80 class product
Segment
Flexible packaging;
Food products;
Industrial and shipping packaging;
Other goods
Processing Method
Extrusion
Areas of use
High-strength sleeve and laminated film
MFI (g/10 min)
1.0 (2.16 kg)
Density (g/cm3)
0.918
Type of polymer
Linear low-density polyethylene (LLDPE)
Special additives
Basic stabilization recipe with a processing additive
Principal characteristics
Basic grade, triple copolymer of ethylene with butene and hexene
Segment
Packaging for infusion solutions, blisters, polymer cans
Processing Method
Extrusion
Areas of use
Lamination of paper, cardboard, aluminum foil, for food-grade and non-food-grade packaging
MFI (g/10 min)
7.5
Density (g/cm3)
0.921
Type of polymer
Low-density polyethylene (LDPE)
Special additives
No additives
Principal characteristics
Basic polyethylene grade for coating at high application rates. Reduced extractables. Improved rheological properties of products
Segment
Pipes
Processing Method
Extrusion
Areas of use
General-purpose pipes
MFI (g/10 min)
8.5 (at 21.6 kg)
Density (g/cm3)
0.949
Type of polymer
High-density polyethylene (HDPE)
Special additives
Enhanced stabilization
Principal characteristics
A bimodal product similar to PE100. Long service life, high hydrolytic strength.
Segment
Geosynthetics
Processing Method
Extrusion
Areas of use
Pressure pipes and fittings for domestic water supply and gas distribution networks
MFI (g/10 min)
0.18 (5 kg)
Density (g/cm3)
0.959
Type of polymer
High-density polyethylene (HDPE)
Special additives
Enhanced stabilization, UV stabilizer
Principal characteristics
A bimodal product of PE100 class. Long service life, high hydrolytic strength. UV resistant.
Segment
Flexible packaging;
Industrial and shipping packaging;
Other goods
Processing Method
Extrusion
Areas of use
Mono- and multilayer sleeve films, such as general purpose films, FFS films, agricultural films, consumer packaging films, bags
MFI (g/10 min)
0.40 (2.16 kg)
Density (g/cm3)
0.935
Type of polymer
РЕ
Special additives
Basic stabilization recipe
Principal characteristics
Polymer compound containing 60% of the secondary fraction from consumer waste (PCR waste). The grade is characterized by high manufacturability. Color: transparent gray
Segment
Flexible packaging;
Transparent food-grade films;
Other goods
Processing Method
Extrusion
Areas of use
Shrink film, agricultural films, FFS films, films for consumer packaging
MFI (g/10 min)
0.30 (2.16 kg)
Density (g/cm3)
0.925
Type of polymer
РЕ
Special additives
Basic stabilization recipe
Principal characteristics
Polymer compound containing 70% of the secondary fraction from consumer waste (PCR waste). The grade is characterized by high manufacturability. Color: transparent gray
Segment
Cable insulation
Processing Method
Extrusion
Areas of use
Outer sheath of power and telecommunications cables, outer coating of gas, oil and water pipelines
MFI (g/10 min)
0.45-0.50
Density (g/cm3)
0.946-0.948
Type of polymer
High-density polyethylene (HDPE)
Principal characteristics
The product is characterized by increased resistance to cracking, high strength and impact properties, as well as low temperature characteristics.
ABS plastic
Brand
Segment
Processing Method
Areas of use
Melt flow rate range, g/10min. (at 220 °C, 5kg load)
Min Vicat softening temperature (°C)
Tear resistance (MPa), NLT
Izod impact strength, notched (J/m), NLT
Bending strength (MPa), NLT
Mass fraction of residual styrene (%), NMT
Gloss at 60˚ angle, NLT
Principal characteristics
Household appliances, electronics, toys, tool making;
Automotive components
Extrusion
For the production of sheets with high surface quality (co-extruded or not and with high extrusion multiplicity) for various applications such as refrigeration, plumbing, automotive, packaging and furniture industry (profiles)
4.0 ±1.5
100
45
15
68
0.05
60
Good rigidity and strength balance
Household appliances, electronics, toys, tool making;
Automotive components
Extrusion
Used for thick-sheet extrusion (co-extruded or not) for plumbing and transport products. The grade is produced only in natural color, with no additives or colors
4.5 ±1.5
100
20
0.05
60
Very high-impact grade for sheet extrusion with high processability and improved heat resistance
Household appliances, electronics, toys, tool making;
Automotive components
Extrusion
For the production of large sheet with high surface quality (co-extruded or not and with high extrusion multiplicity) for various applications, such as the refrigeration industry, plumbing, automotive, packaging and furniture industry (profiles)
5.0 ±1.5
100
35
16.5
68
0.05
60
High strength and rigidity, as well as high heat resistance
Household appliances, electronics, toys, tool making
Extrusion
Used in the automotive industry for interior decoration components.
10.0 ±1.5
98
40
10
62
0.05
50
Average heat resistance, high fluidity and impact resistance, improved heat resistance during processing
Segment
Household appliances, electronics, toys, tool making;
Automotive components
Processing Method
Extrusion
Areas of use
For the production of sheets with high surface quality (co-extruded or not and with high extrusion multiplicity) for various applications such as refrigeration, plumbing, automotive, packaging and furniture industry (profiles)
Melt flow rate range, g/10min. (at 220 °C, 5kg load)
4.0 ±1.5
Min Vicat softening temperature (°C)
100
Tear resistance (MPa), NLT
45
Izod impact strength, notched (J/m), NLT
15
Bending strength (MPa), NLT
68
Mass fraction of residual styrene (%), NMT
0.05
Gloss at 60˚ angle, NLT
60
Principal characteristics
Good rigidity and strength balance
Segment
Household appliances, electronics, toys, tool making;
Automotive components
Processing Method
Extrusion
Areas of use
Used for thick-sheet extrusion (co-extruded or not) for plumbing and transport products. The grade is produced only in natural color, with no additives or colors
Melt flow rate range, g/10min. (at 220 °C, 5kg load)
4.5 ±1.5
Min Vicat softening temperature (°C)
100
Izod impact strength, notched (J/m), NLT
20
Mass fraction of residual styrene (%), NMT
0.05
Gloss at 60˚ angle, NLT
60
Principal characteristics
Very high-impact grade for sheet extrusion with high processability and improved heat resistance
Segment
Household appliances, electronics, toys, tool making;
Automotive components
Processing Method
Extrusion
Areas of use
For the production of large sheet with high surface quality (co-extruded or not and with high extrusion multiplicity) for various applications, such as the refrigeration industry, plumbing, automotive, packaging and furniture industry (profiles)
Melt flow rate range, g/10min. (at 220 °C, 5kg load)
5.0 ±1.5
Min Vicat softening temperature (°C)
100
Tear resistance (MPa), NLT
35
Izod impact strength, notched (J/m), NLT
16.5
Bending strength (MPa), NLT
68
Mass fraction of residual styrene (%), NMT
0.05
Gloss at 60˚ angle, NLT
60
Principal characteristics
High strength and rigidity, as well as high heat resistance
Segment
Household appliances, electronics, toys, tool making
Processing Method
Extrusion
Areas of use
Used in the automotive industry for interior decoration components.
Melt flow rate range, g/10min. (at 220 °C, 5kg load)
10.0 ±1.5
Min Vicat softening temperature (°C)
98
Tear resistance (MPa), NLT
40
Izod impact strength, notched (J/m), NLT
10
Bending strength (MPa), NLT
62
Mass fraction of residual styrene (%), NMT
0.05
Gloss at 60˚ angle, NLT
50
Principal characteristics
Average heat resistance, high fluidity and impact resistance, improved heat resistance during processing
Optimal solutions for partners
Leave
request
By pressing the button, I agree to the personal data processing policy