Extrusion blow molding

Extrusion blow molding
You can easily find the products you need by subcategories and using the navigation filter. Any product you want to download in PDF can be added by selecting it in the catalog.
Polyethylene
Segment
Rigid packaging;
Food-grade containers, Water containers
Processing Method
Extrusion blow molding
Areas of use
Containers (bottles, cans) up to 50 liters
MFI (g/10 min)
1,1 (5 kg)
Density (g/cm3)
0,959
Type of polymer
High-density polyethylene (HDPE)
Special additives
Basic stabilization formulation
Principal characteristics
Bimodal brand with increased resistance to cracking
Segment
Rigid packaging;
Food-grade containers, Water containers
Processing Method
Extrusion blow molding
Areas of use
Containers up to 20 liters for storage and transportation of household chemicals, oils, liquid food products
MFI (g/10 min)
0,20 (2,16 kg)
Density (g/cm3)
0,955
Type of polymer
High-density polyethylene (HDPE)
Special additives
Basic stabilization formulation
Principal characteristics
Medium molecular weight brand. Balanced physical and mechanical properties, good recyclability and excellent resistance to cracking
Segment
Automotive components;
Home care, cosmetics and personal care products;
Rigid packaging;
Food-grade containers, Water containers;
Sleeves for grain storage
Processing Method
Extrusion blow molding
Areas of use
Containers, tank-type vehicle components
MFI (g/10 min)
0.30 (2.16 kg)
Density (g/cm3)
0.958
Type of polymer
High-density polyethylene (HDPE)
Special additives
No additives
Principal characteristics
Bimodal grade. Balanced stress-strain properties, good processability and high resistance to cracking
Segment
Food-grade containers, Water containers
Processing Method
Extrusion blow molding
Areas of use
Capacity from 1.5 to 5 liters
MFI (g/10 min)
1,7 (5 kg)
Density (g/cm3)
0,952
Type of polymer
High-density polyethylene (HDPE)
Special additives
Basic stabilization formulation
Principal characteristics
Medium molecular weight brand. Balanced physical and mechanical properties, good recyclability and excellent resistance to cracking
Segment
Geosynthetics
Processing Method
Extrusion blow molding
Areas of use
Geosynthetic materials (geogrids, geomembranes, road construction sheets, construction sheets)
MFI (g/10 min)
10 (21.6 kg)
Density (g/cm3)
0.953
Type of polymer
High-density polyethylene (HDPE)
Special additives
No additives
Principal characteristics
High molecular weight grade. Balanced stress-strain properties, high rigidity and resistance to cracking
Segment
Rigid packaging;
Food-grade containers, Water containers
Processing Method
Extrusion blow molding
Areas of use
Vessels (cans, containers, barrels) up to 200 L
MFI (g/10 min)
0.50 (2.16 kg)
Density (g/cm3)
0.952
Type of polymer
High-density polyethylene (HDPE)
Special additives
No additives
Principal characteristics
High molecular weight grade. Balanced stress-strain properties.
Segment
Rigid packaging
Processing Method
Extrusion blow molding
Areas of use
Ampoules and vials for injection/infusion solutions produced using the BFS (blow-fill-seal) technology
MFI (g/10 min)
0.30 (2.16 kg)
Density (g/cm3)
0.927
Type of polymer
Low-density polyethylene (LDPE)
Special additives
No additives
Principal characteristics
High-density grade that allows sterilization at up to 110 °C. Compliance with the requirements of the European Pharmacopoeia
Segment
Rigid packaging
Processing Method
Extrusion blow molding
Areas of use
Ampoules and vials for injection/infusion solutions produced using the BFS (blow-fill-seal) technology
MFI (g/10 min)
0.30 (2.16 kg)
Density (g/cm3)
0.927
Type of polymer
Low-density polyethylene (LDPE)
Special additives
No additives
Principal characteristics
High-density grade that allows sterilization at up to 110 °C. Compliance with the requirements of the European Pharmacopoeia
Segment
Packaging for infusion solutions, blisters, polymer cans
Processing Method
Extrusion blow molding
Areas of use
Ampoules and vials for injection/infusion solutions produced using the BFS (blow-fill-seal) technology
MFI (g/10 min)
0.30 (2.16 kg)
Density (g/cm3)
0.927
Type of polymer
Low-density polyethylene (LDPE)
Special additives
No additives
Principal characteristics
High-density grade that allows sterilization at up to 110 °C. Compliance with the requirements of the European Pharmacopoeia
Segment
Packaging for infusion solutions, blisters, polymer cans
Processing Method
Extrusion blow molding
Areas of use
Containers, tank-type vehicle components
MFI (g/10 min)
0.30 (2.16 kg)
Density (g/cm3)
0.958
Type of polymer
High-density polyethylene (HDPE)
Special additives
No additives
Principal characteristics
Bimodal grade. Balanced stress-strain properties, good processability and high resistance to cracking
Polypropylene
Brand
Segment
Packaging for infusion solutions, blisters, polymer cans
Processing Method
Extrusion blow molding
Areas of use
Vials for injection/infusion solutions produced using the BFS (blow-fill-seal) technology
MFI (g/10 min)
1.8
Min flexural modulus (MPa)
900
Type of polymer
Polypropylene Random Copolymer (PPR)
Special additives
Basic stabilization recipe
Principal characteristics
High chemical purity. The sterilization temperature is 121 °C. Compliance with the requirements of the European Pharmacopoeia
Segment
Automotive components
Processing Method
Extrusion blow molding
Areas of use
Battery housings, automotive products made by extrusion and blow molding
MFI (g/10 min)
1.6
Min flexural modulus (MPa)
1350
Min Izod impact strength, J/m
at 23 ̊C 500 at -20 ̊C — not standardized at -40 ̊C – not determined
Type of polymer
Polypropylene Block Copolymer (PPB)
Special additives
Nucleating agent, antistatic additive
Principal characteristics
Improved stress-strain properties, for the production of polymer products with high resistance to cracking and frost resistance
Segment
Rigid packaging
Processing Method
Extrusion blow molding
Areas of use
Vials for injection/infusion solutions produced using the BFS (blow-fill-seal) technology
MFI (g/10 min)
1.8
Min flexural modulus (MPa)
900
Type of polymer
Polypropylene Random Copolymer (PPR)
Special additives
Basic stabilization recipe
Principal characteristics
High chemical purity. The sterilization temperature is 121 °C. Compliance with the requirements of the European Pharmacopoeia
Segment
Rigid packaging;
Food products;
Packaging for infusion solutions, blisters, polymer cans
Processing Method
Extrusion blow molding
Areas of use
Bottles, packaging containers and other large and medium-size hollow parts
MFI (g/10 min)
1.8
Min flexural modulus (MPa)
950
Min Izod impact strength, J/m
-
Type of polymer
Polypropylene Random Copolymer (PPR)
Special additives
Clarifier
Principal characteristics
A special grade with enhanced transparency
Optimal solutions for partners
Leave
request
By pressing the button, I agree to the personal data processing policy