Buy products

Base polymers

Base polymers
You can easily find the products you need by subcategories and using the navigation filter. Any product you want to download in PDF can be added by selecting it in the catalog.
Base polymers
View catalog
Selected 0 file to download
Base polymers
View PDF
Selected 0 file to download
Polyethylene
Brand
Segment
Processing Method
Areas of use
MFI (g/10 min)
Density (g/cm3)
Type of polymer
Special additives
Principal characteristics
Min flexural modulus (MPa)
Modulus of elasticity in bending, not less than, MPa
Flexible packaging;
Food products;
Industrial and shipping packaging;
Other goods;
Covering materials;
Silage and haylage films;
Greenhouses with film coating
Extrusion
Films for food-grade and non-food-grade packaging
2.0 (2.16 kg)
0.919
Low-density polyethylene (LDPE)
No additives
Basic polyethylene grade for film production
Flexible packaging;
Food products;
Other goods
Extrusion
Lamination of paper, cardboard, aluminum foil, for food-grade and non-food-grade packaging
7.0
0.918
Low-density polyethylene (LDPE)
No additives
Basic polyethylene grade for film production, coating at low application rates
Cable insulation;
Geosynthetics
Extrusion
Overlay of sheaths - точно нормальный перевод?, protective covers of cables by extrusion
0,30
0,921
LDPE Low-density polyethylene (LDPE)
Special formulation with enhanced thermal stability of the melt and increased resistance to thermal-oxidative degradation during product operation
The product is characterized by a special composition of the stabilization formula, which prevents the oxidation of the copper conductors of the product.
Cable insulation
Extrusion
Application of insulation, sheaths, protective covers of cables by extrusion
0.30
0.919–0.922
Low-density polyethylene (LDPE)
A special recipe with enhanced thermal stability of the melt and increased resistance to thermal oxidative degradation during the product use
The product is characterized by a special composition of the stabilization recipe, with increased thermal oxidative stability.
Cable insulation
Extrusion
Application of insulation, sheaths, protective covers of cables by extrusion
0.30
Low-density polyethylene (LDPE)
A special recipe with enhanced thermal stability of the melt and increased resistance to thermal oxidative degradation during the product use
The product is characterized by a special composition of the stabilization recipe, with increased thermal oxidative and photooxidative stability.
Flexible packaging;
Food products;
Industrial and shipping packaging;
Other goods;
Sleeves for grain storage;
Silage and haylage films;
Greenhouses with film coating
Extrusion
Shrink films, films for food-grade and non-food-grade packaging
0.30 (2.16 kg)
0.921
Low-density polyethylene (LDPE)
No additives
Basic polyethylene grade for film production
Flexible packaging;
Food products;
Industrial and shipping packaging;
Other goods;
Sleeves for grain storage;
Silage and haylage films;
Greenhouses with film coating
Extrusion
Shrink films, films for food-grade and non-food-grade packaging
0.30 (2.16 kg)
0.921
Low-density polyethylene (LDPE)
No additives
Basic polyethylene grade for film production
Flexible packaging;
Food products;
Industrial and shipping packaging;
Other goods;
Covering materials;
Silage and haylage films;
Greenhouses with film coating
Extrusion
Films for food-grade and non-food-grade packaging
2.0 (2.16 kg)
0.919
Low-density polyethylene (LDPE)
No additives
Basic grade for film production. Excellent compatibility with LLDPE
Flexible packaging;
Food products;
Industrial and shipping packaging;
Other goods;
Covering materials;
Silage and haylage films;
Greenhouses with film coating
Extrusion
Films for food-grade and non-food-grade packaging
2.0 (2.16 kg)
0.919
Low-density polyethylene (LDPE)
No additives
Basic polyethylene grade for film production
Cable insulation
Extrusion
Application of insulation, sheaths, protective covers of cables by extrusion
0.3–0.65
0.950–0.955
High-density polyethylene (HDPE)"
A special recipe with enhanced thermal stability of the melt and increased resistance to thermal oxidative degradation during the product use
The product is characterized by a special composition of the stabilization recipe, with increased thermal oxidative stability.
Rigid packaging;
Food-grade containers, Water containers
Extrusion blow molding
Containers (bottles, cans) up to 50 liters
1,1 (5 kg)
0,959
High-density polyethylene (HDPE)
Basic stabilization formulation
Bimodal brand with increased resistance to cracking
Geosynthetics
Extrusion
General-purpose pipes
0.30 (5 kg)
0.949
High-density polyethylene (HDPE)
Enhanced stabilization
A bimodal product of PE100 class. Long service life, high hydrolytic strength
1000
Pipes
Extrusion
Pressure pipes and fittings for domestic water supply and gas distribution networks
0,25 (5 kg)
0.959
High-density polyethylene (HDPE)
Enhanced stabilization, UV stabilizer
A bimodal product of PE100 class. Long service life, high hydrolytic strength. UV resistant.
1000
Pipes
Extrusion
Pressure pipes and fittings for an alternative method of laying according to PAS 1075 in domestic water supply and gas distribution networks
0.30 (5 kg)
0.959
High-density polyethylene (HDPE)
Enhanced stabilization, UV stabilizer
A bimodal product of PE100 class. Long service life, high hydrolytic strength. UV resistant. High resistance to crack propagation.
1000
Rigid packaging;
Food-grade containers, Water containers
Extrusion blow molding
Containers up to 20 liters for storage and transportation of household chemicals, oils, liquid food products
0,20 (2,16 kg)
0,955
High-density polyethylene (HDPE)
Basic stabilization formulation
Medium molecular weight brand. Balanced physical and mechanical properties, good recyclability and excellent resistance to cracking
Automotive components;
Home care, cosmetics and personal care products;
Rigid packaging;
Food-grade containers, Water containers;
Sleeves for grain storage
Extrusion blow molding
Containers, tank-type vehicle components
0.30 (2.16 kg)
0.958
High-density polyethylene (HDPE)
No additives
Bimodal grade. Balanced stress-strain properties, good processability and high resistance to cracking
Geosynthetics
Extrusion
Geosynthetic materials (geogrids, geomembranes, road construction sheets, construction sheets)
0.30 (2.16 kg)
0.958
High-density polyethylene (HDPE)
No additives
Bimodal grade. Balanced stress-strain properties, good processability and high resistance to cracking
Food-grade containers, Water containers
Extrusion blow molding
Capacity from 1.5 to 5 liters
1,7 (5 kg)
0,952
High-density polyethylene (HDPE)
Basic stabilization formulation
Medium molecular weight brand. Balanced physical and mechanical properties, good recyclability and excellent resistance to cracking
Flexible packaging;
Other goods;
Sleeves for grain storage
Extrusion
Bags, packing, industrial packaging
10 (21.6 kg)
0.950
High-density polyethylene (HDPE)
Basic stabilization recipe
Extensive molecular weight distribution, high melt strength, high film tensile strength, puncture and tear resistance.
Geosynthetics;
Covering materials
Extrusion
Geosynthetic materials (geogrids, geomembranes, road construction sheets, construction sheets)
10 (21.6 kg)
0.950
High-density polyethylene (HDPE)
Basic stabilization recipe
Extensive molecular weight distribution, high melt strength, high film tensile strength, puncture and tear resistance.
Rigid packaging;
Industrial and shipping packaging
Extrusion
Vessels (canisters, containers, barrels) up to 227 L for aggressive substance storage
10 (21.6 kg)
0.953
High-density polyethylene (HDPE)
No additives
High molecular weight grade. Balanced stress-strain properties, high rigidity and resistance to cracking
Geosynthetics
Extrusion blow molding
Geosynthetic materials (geogrids, geomembranes, road construction sheets, construction sheets)
10 (21.6 kg)
0.953
High-density polyethylene (HDPE)
No additives
High molecular weight grade. Balanced stress-strain properties, high rigidity and resistance to cracking
Geosynthetics;
Covering materials
Extrusion
Geosynthetic materials (geogrids, geomembranes, road sheets, building sheets)
0.70 (5 kg)
0.946
High-density polyethylene (HDPE)
Enhanced stabilization recipe with a processing additive
Extensive molecular weight distribution, high melt strength, high film tensile strength, puncture and tear resistance.
Flexible packaging;
Industrial and shipping packaging;
Other goods;
Food products
Extrusion
Bags, packing, industrial packaging
0.70 (5 kg)
0.946
High-density polyethylene (HDPE)
Enhanced stabilization recipe with a processing additive
Extensive molecular weight distribution, high melt strength, high film tensile strength, puncture and tear resistance.
Rigid packaging;
Food-grade containers, Water containers
Extrusion blow molding
Vessels (cans, containers, barrels) up to 200 L
0.50 (2.16 kg)
0.952
High-density polyethylene (HDPE)
No additives
High molecular weight grade. Balanced stress-strain properties.
Geosynthetics
Extrusion
Geosynthetic materials (geogrids, geomembranes, road construction sheets, construction sheets)
0.50 (2.16 kg)
0.952
High-density polyethylene (HDPE)
No additives
High molecular weight grade. Balanced stress-strain properties.
Geosynthetics
Extrusion
Geosynthetic materials (geogrids, geomembranes, road sheets, building sheets)
0.53 (5 kg)
0.951
High-density polyethylene (HDPE)
Enhanced stabilization recipe with a processing additive
High resistance to cracking and stress-strain properties
Flexible packaging;
Industrial and shipping packaging;
Food products;
Other goods
Extrusion
Thin films (less than 10 microns), bags, packaging, industrial packaging. Available for use in a mixture with low-flow grades of low-density polyethylene in the recipes of shrink films, films for packaging heavy loads
0.53 (5 kg)
0.951
High-density polyethylene (HDPE)
Enhanced stabilization recipe with a processing additive
High resistance to cracking and stress-strain properties
Beverages;
Food industry;
Industrial and shipping packaging
Injection molding
Food and industrial containers, pallets, caps, dispensers
13 (2,16 kg)
0,963
High-density polyethylene (HDPE)
Basic stabilization formulation
Base brand
-
Rigid packaging;
Beverages;
Industrial and shipping packaging;
Packaging for infusion solutions, blisters, polymer cans
Thermal molding
Food-grade and industrial containers, pallets, containers, boxes, caps
4.5 (2.16 kg)
0.953
High-density polyethylene (HDPE)
UV stabilizer
Grade with a special recipe composition (UV)
Flexible packaging;
Food products;
Industrial and shipping packaging;
Other goods
Extrusion
Thin films (less than 10 microns), bags, packaging, industrial packaging. Available for use in a mixture with low-flow grades of low-density polyethylene in the recipes of shrink films, films for packaging heavy loads
8.0 (21.6 kg)
0.952
High-density polyethylene (HDPE)
Basic stabilization recipe
Bimodal grade. Improved balance of mechanical properties combined with good processability, high strength performance and stability of the film sleeve
Transport infrastructure;
Housing construction;
Beverages;
Rigid packaging;
Geosynthetics;
Industrial and shipping packaging
Injection molding
Food-grade and industrial containers, pallets, caps, dispensers
7.5 (2.16 kg)
0.963
High-density polyethylene (HDPE)
Basic stabilization recipe with a processing additive
Basic grade
Beverages;
Industrial and shipping packaging;
Containers for seedlings;
Irrigation and land reclamation
Injection molding
Food and industrial containers, pallets, caps, dispensers
7,5 (2,16 kg)
0,963
High-density polyethylene (HDPE)
UV stabilizer, processing additive
Brand with special formulation composition (UV)
-
Flexible packaging;
Food products;
Industrial and shipping packaging;
Other goods;
Silage and haylage films;
Greenhouses with film coating
Extrusion
Shrink films, films for food-grade and non-food-grade packaging
0.30 (2.16 kg)
0.926
Low-density polyethylene (LDPE)
No additives
A special grade with improved optical properties and tear resistance
Rigid packaging
Extrusion blow molding
Ampoules and vials for injection/infusion solutions produced using the BFS (blow-fill-seal) technology
0.30 (2.16 kg)
0.927
Low-density polyethylene (LDPE)
No additives
High-density grade that allows sterilization at up to 110 °C. Compliance with the requirements of the European Pharmacopoeia
Rigid packaging
Extrusion blow molding
Ampoules and vials for injection/infusion solutions produced using the BFS (blow-fill-seal) technology
0.30 (2.16 kg)
0.927
Low-density polyethylene (LDPE)
No additives
High-density grade that allows sterilization at up to 110 °C. Compliance with the requirements of the European Pharmacopoeia
Flexible packaging;
Food products;
Industrial and shipping packaging;
Other goods;
Silage and haylage films;
Greenhouses with film coating
Extrusion
Multilayer films for lamination, general purpose films
0.80 (2.16 kg)
0.923
Low-density polyethylene (LDPE)
No additives
A special grade with improved optical properties. Excellent compatibility with LLDPE
Flexible packaging;
Food products;
Industrial and shipping packaging;
Other goods;
Silage and haylage films;
Greenhouses with film coating
Extrusion
Films for food-grade and non-food-grade packaging
2.0 (2.16 kg)
0.926
Low-density polyethylene (LDPE)
No additives
A special grade with improved optical properties. Excellent compatibility with LLDPE
Flexible packaging;
Food products;
Other goods
Extrusion
Extrusion coating of paper, cardboard
4.0
0.920
Low-density polyethylene (LDPE)
No additives
A special grade for extrusion coatings enables the increase in the output (increase in the irrigation rate by 10–20%, reducing the consumption of irrigation material by 10–15%), stable watering at high speeds, low level of characteristic smoking, reduction in irrigation unevenness, low edge beating
Automotive components
Foaming
Foamed polyethylene for automobile interior decoration
4.0
0.920
Low-density polyethylene (LDPE)
No additives
A special grade for foaming. Enables the increase in the output, obtaining a more uniform foam structure with intense color
Flexible packaging;
Food products
Extrusion
Highly transparent mono- and multilayer cast food-grade films (including sealed packaging)
4,0 (2,16 kg)
0,925
Low-density polyethylene (LDPE)
Antioxidant
Excellent optical properties, good processability
Flexible packaging;
Food products;
Other goods
Extrusion
Lamination of paper, cardboard, aluminum foil, for food-grade and non-food-grade packaging
5.0
0.921
Low-density polyethylene (LDPE)
No additives
Basic polyethylene grade for coating at high application rates. Reduced extractables. Improved rheological properties of products
Flexible packaging;
Food products;
Other goods
Extrusion
Lamination of paper, cardboard, aluminum foil, for food-grade and non-food-grade packaging
7.5
0.921
Low-density polyethylene (LDPE)
No additives
Basic polyethylene grade for coating at high application rates. Reduced extractables. Improved rheological properties of products
Flexible packaging;
Food products;
Industrial and shipping packaging;
Other goods;
Silage and haylage films
Extrusion
High-strength stretch film
3.0 (2.16 kg)
0.918
Linear low-density polyethylene (LLDPE)
Basic stabilization recipe with a processing additive
Basic grade, triple copolymer of ethylene with butene and hexene
Packaging;
Flexible packaging;
Transparent non-food-grade films;
Silage and haylage films;
Greenhouses with film coating
Multilayer sleeve films: general purpose films, consumer packaging films, FFS films, lamination films, agricultural films
0,3 (2,16)
0,932
Linear low-density polyethylene (LLDPE)
Basic recipe for stabilization
Balanced physical and mechanical properties combined with good recyclability. High strength indicators
Geosynthetics
Extrusion
Geomembranes
0.9 (2.16 kg)
0.920
Linear low-density polyethylene (LLDPE)
Basic stabilization recipe
Balanced combination of physicomechanical and optical properties. High strength performance, resistance to punctures, excellent weldability Excellent compatibility with LDPE
Flexible packaging;
Food products;
Covering materials;
Sleeves for grain storage;
Silage and haylage films;
Greenhouses with film coating
Extrusion
Films for food-grade and non-food-grade packaging, laminating films, coating films for sealing, industrial films, shopping bags and garbage bags
0.9 (2.16 kg)
0.920
Linear low-density polyethylene (LLDPE)
Basic stabilization recipe
Balanced combination of physicomechanical and optical properties. High strength performance, resistance to punctures, excellent weldability Excellent compatibility with LDPE
Geosynthetics
Extrusion
Geomembranes
2.0 (2.16 kg)
0.920
Linear low-density polyethylene (LLDPE)
Basic stabilization recipe
Balanced combination of physicomechanical and optical properties. High strength performance. Excellent compatibility with LDPE
Flexible packaging;
Food products;
Other goods;
Covering materials;
Silage and haylage films;
Greenhouses with film coating
Extrusion
General purpose packaging films, lamination films, sealable coating films, agricultural films, bags
2.0 (2.16 kg)
0.920
Linear low-density polyethylene (LLDPE)
Basic stabilization recipe
Balanced combination of physicomechanical and optical properties. High strength performance. Excellent compatibility with LDPE
Flexible packaging;
Food products;
Other goods;
Silage and haylage films;
Greenhouses with film coating
Extrusion
General purpose packaging films, lamination films, bags
2.0 (2.16 kg)
0.921
Linear low-density polyethylene (LLDPE)
Slip agent and anti-blocking additive
Improved physicomechanical and optical properties. High strength performance, excellent anti-blocking and slipping properties of the finished film products. Excellent compatibility with LDPE
Flexible packaging;
Food products;
Industrial and shipping packaging;
Other goods;
Covering materials;
Silage and haylage films
Extrusion
General purpose packaging films, lamination films, sealable coating films, agricultural films, bags
3.0 (2.16 kg)
0.919
Linear low-density polyethylene (LLDPE)
Basic stabilization recipe
Balanced combination of physicomechanical and optical properties. The properties and the structure of the polymer ensure high extrusion line performance
Flexible packaging;
Food products;
Industrial and shipping packaging;
Other goods;
Silage and haylage films
Extrusion
Cast films
3.0 (2.16 kg)
0.920
Linear low-density polyethylene (LLDPE)
Basic stabilization recipe with a processing additive
Basic grade for use both in pure form and in mixtures with LDPE and HDPE
Flexible packaging;
Food products;
Industrial and shipping packaging;
Other goods;
Sleeves for grain storage;
Silage and haylage films;
Polycarbonate greenhouses;
Greenhouses with film coating
Extrusion
Various film materials
1.0 (2.16 kg)
0.920
Metallocene LLDPE Linear low-density polyethylene (mLLDPE)
Basic stabilization recipe with a processing additive
Metallocene grade with increased puncture resistance
Flexible packaging;
Food products;
Industrial and shipping packaging;
Other goods;
Silage and haylage films;
Greenhouses with film coating
Extrusion
Cast films
3.0 (2.16 kg)
0.920
Metallocene LLDPE Linear low-density polyethylene (mLLDPE)
Basic stabilization recipe with a processing additive
Metallocene grade with increased puncture resistance
Pipes
Extrusion
Pressure intra-house pipes for water supply and underfloor heating
12.5 (at 21.6 kg)
0.938
High-density polyethylene (HDPE)
Enhanced stabilization
PE-RT Type 1 PE80 class product
Flexible packaging;
Food products;
Industrial and shipping packaging;
Other goods
Extrusion
High-strength sleeve and laminated film
1.0 (2.16 kg)
0.918
Linear low-density polyethylene (LLDPE)
Basic stabilization recipe with a processing additive
Basic grade, triple copolymer of ethylene with butene and hexene
Packaging for infusion solutions, blisters, polymer cans
Extrusion blow molding
Ampoules and vials for injection/infusion solutions produced using the BFS (blow-fill-seal) technology
0.30 (2.16 kg)
0.927
Low-density polyethylene (LDPE)
No additives
High-density grade that allows sterilization at up to 110 °C. Compliance with the requirements of the European Pharmacopoeia
Packaging for infusion solutions, blisters, polymer cans
Extrusion blow molding
Containers, tank-type vehicle components
0.30 (2.16 kg)
0.958
High-density polyethylene (HDPE)
No additives
Bimodal grade. Balanced stress-strain properties, good processability and high resistance to cracking
Medical containers
Injection molding
Сaps, lids medical
1.5
0.955
High-density polyethylene (HDPE)
Basic recipe
ав
Packaging for infusion solutions, blisters, polymer cans
Extrusion
Lamination of paper, cardboard, aluminum foil, for food-grade and non-food-grade packaging
7.5
0.921
Low-density polyethylene (LDPE)
No additives
Basic polyethylene grade for coating at high application rates. Reduced extractables. Improved rheological properties of products
Pipes
Extrusion
General-purpose pipes
8.5 (at 21.6 kg)
0.949
High-density polyethylene (HDPE)
Enhanced stabilization
A bimodal product similar to PE100. Long service life, high hydrolytic strength.
Geosynthetics
Extrusion
Pressure pipes and fittings for domestic water supply and gas distribution networks
0.18 (5 kg)
0.959
High-density polyethylene (HDPE)
Enhanced stabilization, UV stabilizer
A bimodal product of PE100 class. Long service life, high hydrolytic strength. UV resistant.
Beverages;
Rigid packaging
Injection molding
Food-grade and industrial containers, pallets, caps, dispensers
5.0 (2.16 kg)
0.953
High-density polyethylene (HDPE)
Basic stabilization recipe
Increased resistance to cracking
Flexible packaging;
Industrial and shipping packaging;
Other goods
Extrusion
Mono- and multilayer sleeve films, such as general purpose films, FFS films, agricultural films, consumer packaging films, bags
0.40 (2.16 kg)
0.935
РЕ
Basic stabilization recipe
Polymer compound containing 60% of the secondary fraction from consumer waste (PCR waste). The grade is characterized by high manufacturability. Color: transparent gray
Flexible packaging;
Transparent food-grade films;
Other goods
Extrusion
Shrink film, agricultural films, FFS films, films for consumer packaging
0.30 (2.16 kg)
0.925
РЕ
Basic stabilization recipe
Polymer compound containing 70% of the secondary fraction from consumer waste (PCR waste). The grade is characterized by high manufacturability. Color: transparent gray
Cable insulation
Extrusion
Outer sheath of power and telecommunications cables, outer coating of gas, oil and water pipelines
0.45-0.50
0.946-0.948
High-density polyethylene (HDPE)
The product is characterized by increased resistance to cracking, high strength and impact properties, as well as low temperature characteristics.
Segment
Flexible packaging;
Food products;
Industrial and shipping packaging;
Other goods;
Covering materials;
Silage and haylage films;
Greenhouses with film coating
Processing Method
Extrusion
Areas of use
Films for food-grade and non-food-grade packaging
MFI (g/10 min)
2.0 (2.16 kg)
Density (g/cm3)
0.919
Type of polymer
Low-density polyethylene (LDPE)
Special additives
No additives
Principal characteristics
Basic polyethylene grade for film production
Segment
Flexible packaging;
Food products;
Other goods
Processing Method
Extrusion
Areas of use
Lamination of paper, cardboard, aluminum foil, for food-grade and non-food-grade packaging
MFI (g/10 min)
7.0
Density (g/cm3)
0.918
Type of polymer
Low-density polyethylene (LDPE)
Special additives
No additives
Principal characteristics
Basic polyethylene grade for film production, coating at low application rates
Segment
Cable insulation;
Geosynthetics
Processing Method
Extrusion
Areas of use
Overlay of sheaths - точно нормальный перевод?, protective covers of cables by extrusion
MFI (g/10 min)
0,30
Density (g/cm3)
0,921
Type of polymer
LDPE Low-density polyethylene (LDPE)
Special additives
Special formulation with enhanced thermal stability of the melt and increased resistance to thermal-oxidative degradation during product operation
Principal characteristics
The product is characterized by a special composition of the stabilization formula, which prevents the oxidation of the copper conductors of the product.
Segment
Cable insulation
Processing Method
Extrusion
Areas of use
Application of insulation, sheaths, protective covers of cables by extrusion
MFI (g/10 min)
0.30
Density (g/cm3)
0.919–0.922
Type of polymer
Low-density polyethylene (LDPE)
Special additives
A special recipe with enhanced thermal stability of the melt and increased resistance to thermal oxidative degradation during the product use
Principal characteristics
The product is characterized by a special composition of the stabilization recipe, with increased thermal oxidative stability.
Segment
Cable insulation
Processing Method
Extrusion
Areas of use
Application of insulation, sheaths, protective covers of cables by extrusion
MFI (g/10 min)
0.30
Type of polymer
Low-density polyethylene (LDPE)
Special additives
A special recipe with enhanced thermal stability of the melt and increased resistance to thermal oxidative degradation during the product use
Principal characteristics
The product is characterized by a special composition of the stabilization recipe, with increased thermal oxidative and photooxidative stability.
Segment
Flexible packaging;
Food products;
Industrial and shipping packaging;
Other goods;
Sleeves for grain storage;
Silage and haylage films;
Greenhouses with film coating
Processing Method
Extrusion
Areas of use
Shrink films, films for food-grade and non-food-grade packaging
MFI (g/10 min)
0.30 (2.16 kg)
Density (g/cm3)
0.921
Type of polymer
Low-density polyethylene (LDPE)
Special additives
No additives
Principal characteristics
Basic polyethylene grade for film production
Segment
Flexible packaging;
Food products;
Industrial and shipping packaging;
Other goods;
Sleeves for grain storage;
Silage and haylage films;
Greenhouses with film coating
Processing Method
Extrusion
Areas of use
Shrink films, films for food-grade and non-food-grade packaging
MFI (g/10 min)
0.30 (2.16 kg)
Density (g/cm3)
0.921
Type of polymer
Low-density polyethylene (LDPE)
Special additives
No additives
Principal characteristics
Basic polyethylene grade for film production
Segment
Flexible packaging;
Food products;
Industrial and shipping packaging;
Other goods;
Covering materials;
Silage and haylage films;
Greenhouses with film coating
Processing Method
Extrusion
Areas of use
Films for food-grade and non-food-grade packaging
MFI (g/10 min)
2.0 (2.16 kg)
Density (g/cm3)
0.919
Type of polymer
Low-density polyethylene (LDPE)
Special additives
No additives
Principal characteristics
Basic grade for film production. Excellent compatibility with LLDPE
Segment
Flexible packaging;
Food products;
Industrial and shipping packaging;
Other goods;
Covering materials;
Silage and haylage films;
Greenhouses with film coating
Processing Method
Extrusion
Areas of use
Films for food-grade and non-food-grade packaging
MFI (g/10 min)
2.0 (2.16 kg)
Density (g/cm3)
0.919
Type of polymer
Low-density polyethylene (LDPE)
Special additives
No additives
Principal characteristics
Basic polyethylene grade for film production
Segment
Cable insulation
Processing Method
Extrusion
Areas of use
Application of insulation, sheaths, protective covers of cables by extrusion
MFI (g/10 min)
0.3–0.65
Density (g/cm3)
0.950–0.955
Type of polymer
High-density polyethylene (HDPE)"
Special additives
A special recipe with enhanced thermal stability of the melt and increased resistance to thermal oxidative degradation during the product use
Principal characteristics
The product is characterized by a special composition of the stabilization recipe, with increased thermal oxidative stability.
Segment
Rigid packaging;
Food-grade containers, Water containers
Processing Method
Extrusion blow molding
Areas of use
Containers (bottles, cans) up to 50 liters
MFI (g/10 min)
1,1 (5 kg)
Density (g/cm3)
0,959
Type of polymer
High-density polyethylene (HDPE)
Special additives
Basic stabilization formulation
Principal characteristics
Bimodal brand with increased resistance to cracking
Segment
Geosynthetics
Processing Method
Extrusion
Areas of use
General-purpose pipes
MFI (g/10 min)
0.30 (5 kg)
Density (g/cm3)
0.949
Type of polymer
High-density polyethylene (HDPE)
Special additives
Enhanced stabilization
Principal characteristics
A bimodal product of PE100 class. Long service life, high hydrolytic strength
Min flexural modulus (MPa)
1000
Segment
Pipes
Processing Method
Extrusion
Areas of use
Pressure pipes and fittings for domestic water supply and gas distribution networks
MFI (g/10 min)
0,25 (5 kg)
Density (g/cm3)
0.959
Type of polymer
High-density polyethylene (HDPE)
Special additives
Enhanced stabilization, UV stabilizer
Principal characteristics
A bimodal product of PE100 class. Long service life, high hydrolytic strength. UV resistant.
Min flexural modulus (MPa)
1000
Segment
Pipes
Processing Method
Extrusion
Areas of use
Pressure pipes and fittings for an alternative method of laying according to PAS 1075 in domestic water supply and gas distribution networks
MFI (g/10 min)
0.30 (5 kg)
Density (g/cm3)
0.959
Type of polymer
High-density polyethylene (HDPE)
Special additives
Enhanced stabilization, UV stabilizer
Principal characteristics
A bimodal product of PE100 class. Long service life, high hydrolytic strength. UV resistant. High resistance to crack propagation.
Min flexural modulus (MPa)
1000
Segment
Rigid packaging;
Food-grade containers, Water containers
Processing Method
Extrusion blow molding
Areas of use
Containers up to 20 liters for storage and transportation of household chemicals, oils, liquid food products
MFI (g/10 min)
0,20 (2,16 kg)
Density (g/cm3)
0,955
Type of polymer
High-density polyethylene (HDPE)
Special additives
Basic stabilization formulation
Principal characteristics
Medium molecular weight brand. Balanced physical and mechanical properties, good recyclability and excellent resistance to cracking
Segment
Automotive components;
Home care, cosmetics and personal care products;
Rigid packaging;
Food-grade containers, Water containers;
Sleeves for grain storage
Processing Method
Extrusion blow molding
Areas of use
Containers, tank-type vehicle components
MFI (g/10 min)
0.30 (2.16 kg)
Density (g/cm3)
0.958
Type of polymer
High-density polyethylene (HDPE)
Special additives
No additives
Principal characteristics
Bimodal grade. Balanced stress-strain properties, good processability and high resistance to cracking
Segment
Geosynthetics
Processing Method
Extrusion
Areas of use
Geosynthetic materials (geogrids, geomembranes, road construction sheets, construction sheets)
MFI (g/10 min)
0.30 (2.16 kg)
Density (g/cm3)
0.958
Type of polymer
High-density polyethylene (HDPE)
Special additives
No additives
Principal characteristics
Bimodal grade. Balanced stress-strain properties, good processability and high resistance to cracking
Segment
Food-grade containers, Water containers
Processing Method
Extrusion blow molding
Areas of use
Capacity from 1.5 to 5 liters
MFI (g/10 min)
1,7 (5 kg)
Density (g/cm3)
0,952
Type of polymer
High-density polyethylene (HDPE)
Special additives
Basic stabilization formulation
Principal characteristics
Medium molecular weight brand. Balanced physical and mechanical properties, good recyclability and excellent resistance to cracking
Segment
Flexible packaging;
Other goods;
Sleeves for grain storage
Processing Method
Extrusion
Areas of use
Bags, packing, industrial packaging
MFI (g/10 min)
10 (21.6 kg)
Density (g/cm3)
0.950
Type of polymer
High-density polyethylene (HDPE)
Special additives
Basic stabilization recipe
Principal characteristics
Extensive molecular weight distribution, high melt strength, high film tensile strength, puncture and tear resistance.
Segment
Geosynthetics;
Covering materials
Processing Method
Extrusion
Areas of use
Geosynthetic materials (geogrids, geomembranes, road construction sheets, construction sheets)
MFI (g/10 min)
10 (21.6 kg)
Density (g/cm3)
0.950
Type of polymer
High-density polyethylene (HDPE)
Special additives
Basic stabilization recipe
Principal characteristics
Extensive molecular weight distribution, high melt strength, high film tensile strength, puncture and tear resistance.
Segment
Rigid packaging;
Industrial and shipping packaging
Processing Method
Extrusion
Areas of use
Vessels (canisters, containers, barrels) up to 227 L for aggressive substance storage
MFI (g/10 min)
10 (21.6 kg)
Density (g/cm3)
0.953
Type of polymer
High-density polyethylene (HDPE)
Special additives
No additives
Principal characteristics
High molecular weight grade. Balanced stress-strain properties, high rigidity and resistance to cracking
Segment
Geosynthetics
Processing Method
Extrusion blow molding
Areas of use
Geosynthetic materials (geogrids, geomembranes, road construction sheets, construction sheets)
MFI (g/10 min)
10 (21.6 kg)
Density (g/cm3)
0.953
Type of polymer
High-density polyethylene (HDPE)
Special additives
No additives
Principal characteristics
High molecular weight grade. Balanced stress-strain properties, high rigidity and resistance to cracking
Segment
Geosynthetics;
Covering materials
Processing Method
Extrusion
Areas of use
Geosynthetic materials (geogrids, geomembranes, road sheets, building sheets)
MFI (g/10 min)
0.70 (5 kg)
Density (g/cm3)
0.946
Type of polymer
High-density polyethylene (HDPE)
Special additives
Enhanced stabilization recipe with a processing additive
Principal characteristics
Extensive molecular weight distribution, high melt strength, high film tensile strength, puncture and tear resistance.
Segment
Flexible packaging;
Industrial and shipping packaging;
Other goods;
Food products
Processing Method
Extrusion
Areas of use
Bags, packing, industrial packaging
MFI (g/10 min)
0.70 (5 kg)
Density (g/cm3)
0.946
Type of polymer
High-density polyethylene (HDPE)
Special additives
Enhanced stabilization recipe with a processing additive
Principal characteristics
Extensive molecular weight distribution, high melt strength, high film tensile strength, puncture and tear resistance.
Segment
Rigid packaging;
Food-grade containers, Water containers
Processing Method
Extrusion blow molding
Areas of use
Vessels (cans, containers, barrels) up to 200 L
MFI (g/10 min)
0.50 (2.16 kg)
Density (g/cm3)
0.952
Type of polymer
High-density polyethylene (HDPE)
Special additives
No additives
Principal characteristics
High molecular weight grade. Balanced stress-strain properties.
Segment
Geosynthetics
Processing Method
Extrusion
Areas of use
Geosynthetic materials (geogrids, geomembranes, road construction sheets, construction sheets)
MFI (g/10 min)
0.50 (2.16 kg)
Density (g/cm3)
0.952
Type of polymer
High-density polyethylene (HDPE)
Special additives
No additives
Principal characteristics
High molecular weight grade. Balanced stress-strain properties.
Segment
Geosynthetics
Processing Method
Extrusion
Areas of use
Geosynthetic materials (geogrids, geomembranes, road sheets, building sheets)
MFI (g/10 min)
0.53 (5 kg)
Density (g/cm3)
0.951
Type of polymer
High-density polyethylene (HDPE)
Special additives
Enhanced stabilization recipe with a processing additive
Principal characteristics
High resistance to cracking and stress-strain properties
Segment
Flexible packaging;
Industrial and shipping packaging;
Food products;
Other goods
Processing Method
Extrusion
Areas of use
Thin films (less than 10 microns), bags, packaging, industrial packaging. Available for use in a mixture with low-flow grades of low-density polyethylene in the recipes of shrink films, films for packaging heavy loads
MFI (g/10 min)
0.53 (5 kg)
Density (g/cm3)
0.951
Type of polymer
High-density polyethylene (HDPE)
Special additives
Enhanced stabilization recipe with a processing additive
Principal characteristics
High resistance to cracking and stress-strain properties
Segment
Beverages;
Food industry;
Industrial and shipping packaging
Processing Method
Injection molding
Areas of use
Food and industrial containers, pallets, caps, dispensers
MFI (g/10 min)
13 (2,16 kg)
Density (g/cm3)
0,963
Type of polymer
High-density polyethylene (HDPE)
Special additives
Basic stabilization formulation
Principal characteristics
Base brand
Min flexural modulus (MPa)
-
Segment
Rigid packaging;
Beverages;
Industrial and shipping packaging;
Packaging for infusion solutions, blisters, polymer cans
Processing Method
Thermal molding
Areas of use
Food-grade and industrial containers, pallets, containers, boxes, caps
MFI (g/10 min)
4.5 (2.16 kg)
Density (g/cm3)
0.953
Type of polymer
High-density polyethylene (HDPE)
Special additives
UV stabilizer
Principal characteristics
Grade with a special recipe composition (UV)
Segment
Flexible packaging;
Food products;
Industrial and shipping packaging;
Other goods
Processing Method
Extrusion
Areas of use
Thin films (less than 10 microns), bags, packaging, industrial packaging. Available for use in a mixture with low-flow grades of low-density polyethylene in the recipes of shrink films, films for packaging heavy loads
MFI (g/10 min)
8.0 (21.6 kg)
Density (g/cm3)
0.952
Type of polymer
High-density polyethylene (HDPE)
Special additives
Basic stabilization recipe
Principal characteristics
Bimodal grade. Improved balance of mechanical properties combined with good processability, high strength performance and stability of the film sleeve
Segment
Transport infrastructure;
Housing construction;
Beverages;
Rigid packaging;
Geosynthetics;
Industrial and shipping packaging
Processing Method
Injection molding
Areas of use
Food-grade and industrial containers, pallets, caps, dispensers
MFI (g/10 min)
7.5 (2.16 kg)
Density (g/cm3)
0.963
Type of polymer
High-density polyethylene (HDPE)
Special additives
Basic stabilization recipe with a processing additive
Principal characteristics
Basic grade
Segment
Beverages;
Industrial and shipping packaging;
Containers for seedlings;
Irrigation and land reclamation
Processing Method
Injection molding
Areas of use
Food and industrial containers, pallets, caps, dispensers
MFI (g/10 min)
7,5 (2,16 kg)
Density (g/cm3)
0,963
Type of polymer
High-density polyethylene (HDPE)
Special additives
UV stabilizer, processing additive
Principal characteristics
Brand with special formulation composition (UV)
Min flexural modulus (MPa)
-
Segment
Flexible packaging;
Food products;
Industrial and shipping packaging;
Other goods;
Silage and haylage films;
Greenhouses with film coating
Processing Method
Extrusion
Areas of use
Shrink films, films for food-grade and non-food-grade packaging
MFI (g/10 min)
0.30 (2.16 kg)
Density (g/cm3)
0.926
Type of polymer
Low-density polyethylene (LDPE)
Special additives
No additives
Principal characteristics
A special grade with improved optical properties and tear resistance
Segment
Rigid packaging
Processing Method
Extrusion blow molding
Areas of use
Ampoules and vials for injection/infusion solutions produced using the BFS (blow-fill-seal) technology
MFI (g/10 min)
0.30 (2.16 kg)
Density (g/cm3)
0.927
Type of polymer
Low-density polyethylene (LDPE)
Special additives
No additives
Principal characteristics
High-density grade that allows sterilization at up to 110 °C. Compliance with the requirements of the European Pharmacopoeia
Segment
Rigid packaging
Processing Method
Extrusion blow molding
Areas of use
Ampoules and vials for injection/infusion solutions produced using the BFS (blow-fill-seal) technology
MFI (g/10 min)
0.30 (2.16 kg)
Density (g/cm3)
0.927
Type of polymer
Low-density polyethylene (LDPE)
Special additives
No additives
Principal characteristics
High-density grade that allows sterilization at up to 110 °C. Compliance with the requirements of the European Pharmacopoeia
Segment
Flexible packaging;
Food products;
Industrial and shipping packaging;
Other goods;
Silage and haylage films;
Greenhouses with film coating
Processing Method
Extrusion
Areas of use
Multilayer films for lamination, general purpose films
MFI (g/10 min)
0.80 (2.16 kg)
Density (g/cm3)
0.923
Type of polymer
Low-density polyethylene (LDPE)
Special additives
No additives
Principal characteristics
A special grade with improved optical properties. Excellent compatibility with LLDPE
Segment
Flexible packaging;
Food products;
Industrial and shipping packaging;
Other goods;
Silage and haylage films;
Greenhouses with film coating
Processing Method
Extrusion
Areas of use
Films for food-grade and non-food-grade packaging
MFI (g/10 min)
2.0 (2.16 kg)
Density (g/cm3)
0.926
Type of polymer
Low-density polyethylene (LDPE)
Special additives
No additives
Principal characteristics
A special grade with improved optical properties. Excellent compatibility with LLDPE
Segment
Flexible packaging;
Food products;
Other goods
Processing Method
Extrusion
Areas of use
Extrusion coating of paper, cardboard
MFI (g/10 min)
4.0
Density (g/cm3)
0.920
Type of polymer
Low-density polyethylene (LDPE)
Special additives
No additives
Principal characteristics
A special grade for extrusion coatings enables the increase in the output (increase in the irrigation rate by 10–20%, reducing the consumption of irrigation material by 10–15%), stable watering at high speeds, low level of characteristic smoking, reduction in irrigation unevenness, low edge beating
Segment
Automotive components
Processing Method
Foaming
Areas of use
Foamed polyethylene for automobile interior decoration
MFI (g/10 min)
4.0
Density (g/cm3)
0.920
Type of polymer
Low-density polyethylene (LDPE)
Special additives
No additives
Principal characteristics
A special grade for foaming. Enables the increase in the output, obtaining a more uniform foam structure with intense color
Segment
Flexible packaging;
Food products
Processing Method
Extrusion
Areas of use
Highly transparent mono- and multilayer cast food-grade films (including sealed packaging)
MFI (g/10 min)
4,0 (2,16 kg)
Density (g/cm3)
0,925
Type of polymer
Low-density polyethylene (LDPE)
Special additives
Antioxidant
Principal characteristics
Excellent optical properties, good processability
Segment
Flexible packaging;
Food products;
Other goods
Processing Method
Extrusion
Areas of use
Lamination of paper, cardboard, aluminum foil, for food-grade and non-food-grade packaging
MFI (g/10 min)
5.0
Density (g/cm3)
0.921
Type of polymer
Low-density polyethylene (LDPE)
Special additives
No additives
Principal characteristics
Basic polyethylene grade for coating at high application rates. Reduced extractables. Improved rheological properties of products
Segment
Flexible packaging;
Food products;
Other goods
Processing Method
Extrusion
Areas of use
Lamination of paper, cardboard, aluminum foil, for food-grade and non-food-grade packaging
MFI (g/10 min)
7.5
Density (g/cm3)
0.921
Type of polymer
Low-density polyethylene (LDPE)
Special additives
No additives
Principal characteristics
Basic polyethylene grade for coating at high application rates. Reduced extractables. Improved rheological properties of products
Segment
Flexible packaging;
Food products;
Industrial and shipping packaging;
Other goods;
Silage and haylage films
Processing Method
Extrusion
Areas of use
High-strength stretch film
MFI (g/10 min)
3.0 (2.16 kg)
Density (g/cm3)
0.918
Type of polymer
Linear low-density polyethylene (LLDPE)
Special additives
Basic stabilization recipe with a processing additive
Principal characteristics
Basic grade, triple copolymer of ethylene with butene and hexene
Segment
Packaging;
Flexible packaging;
Transparent non-food-grade films;
Silage and haylage films;
Greenhouses with film coating
Areas of use
Multilayer sleeve films: general purpose films, consumer packaging films, FFS films, lamination films, agricultural films
MFI (g/10 min)
0,3 (2,16)
Density (g/cm3)
0,932
Type of polymer
Linear low-density polyethylene (LLDPE)
Special additives
Basic recipe for stabilization
Principal characteristics
Balanced physical and mechanical properties combined with good recyclability. High strength indicators
Segment
Geosynthetics
Processing Method
Extrusion
Areas of use
Geomembranes
MFI (g/10 min)
0.9 (2.16 kg)
Density (g/cm3)
0.920
Type of polymer
Linear low-density polyethylene (LLDPE)
Special additives
Basic stabilization recipe
Principal characteristics
Balanced combination of physicomechanical and optical properties. High strength performance, resistance to punctures, excellent weldability Excellent compatibility with LDPE
Segment
Flexible packaging;
Food products;
Covering materials;
Sleeves for grain storage;
Silage and haylage films;
Greenhouses with film coating
Processing Method
Extrusion
Areas of use
Films for food-grade and non-food-grade packaging, laminating films, coating films for sealing, industrial films, shopping bags and garbage bags
MFI (g/10 min)
0.9 (2.16 kg)
Density (g/cm3)
0.920
Type of polymer
Linear low-density polyethylene (LLDPE)
Special additives
Basic stabilization recipe
Principal characteristics
Balanced combination of physicomechanical and optical properties. High strength performance, resistance to punctures, excellent weldability Excellent compatibility with LDPE
Segment
Geosynthetics
Processing Method
Extrusion
Areas of use
Geomembranes
MFI (g/10 min)
2.0 (2.16 kg)
Density (g/cm3)
0.920
Type of polymer
Linear low-density polyethylene (LLDPE)
Special additives
Basic stabilization recipe
Principal characteristics
Balanced combination of physicomechanical and optical properties. High strength performance. Excellent compatibility with LDPE
Segment
Flexible packaging;
Food products;
Other goods;
Covering materials;
Silage and haylage films;
Greenhouses with film coating
Processing Method
Extrusion
Areas of use
General purpose packaging films, lamination films, sealable coating films, agricultural films, bags
MFI (g/10 min)
2.0 (2.16 kg)
Density (g/cm3)
0.920
Type of polymer
Linear low-density polyethylene (LLDPE)
Special additives
Basic stabilization recipe
Principal characteristics
Balanced combination of physicomechanical and optical properties. High strength performance. Excellent compatibility with LDPE
Segment
Flexible packaging;
Food products;
Other goods;
Silage and haylage films;
Greenhouses with film coating
Processing Method
Extrusion
Areas of use
General purpose packaging films, lamination films, bags
MFI (g/10 min)
2.0 (2.16 kg)
Density (g/cm3)
0.921
Type of polymer
Linear low-density polyethylene (LLDPE)
Special additives
Slip agent and anti-blocking additive
Principal characteristics
Improved physicomechanical and optical properties. High strength performance, excellent anti-blocking and slipping properties of the finished film products. Excellent compatibility with LDPE
Segment
Flexible packaging;
Food products;
Industrial and shipping packaging;
Other goods;
Covering materials;
Silage and haylage films
Processing Method
Extrusion
Areas of use
General purpose packaging films, lamination films, sealable coating films, agricultural films, bags
MFI (g/10 min)
3.0 (2.16 kg)
Density (g/cm3)
0.919
Type of polymer
Linear low-density polyethylene (LLDPE)
Special additives
Basic stabilization recipe
Principal characteristics
Balanced combination of physicomechanical and optical properties. The properties and the structure of the polymer ensure high extrusion line performance
Segment
Flexible packaging;
Food products;
Industrial and shipping packaging;
Other goods;
Silage and haylage films
Processing Method
Extrusion
Areas of use
Cast films
MFI (g/10 min)
3.0 (2.16 kg)
Density (g/cm3)
0.920
Type of polymer
Linear low-density polyethylene (LLDPE)
Special additives
Basic stabilization recipe with a processing additive
Principal characteristics
Basic grade for use both in pure form and in mixtures with LDPE and HDPE
Segment
Flexible packaging;
Food products;
Industrial and shipping packaging;
Other goods;
Sleeves for grain storage;
Silage and haylage films;
Polycarbonate greenhouses;
Greenhouses with film coating
Processing Method
Extrusion
Areas of use
Various film materials
MFI (g/10 min)
1.0 (2.16 kg)
Density (g/cm3)
0.920
Type of polymer
Metallocene LLDPE Linear low-density polyethylene (mLLDPE)
Special additives
Basic stabilization recipe with a processing additive
Principal characteristics
Metallocene grade with increased puncture resistance
Segment
Flexible packaging;
Food products;
Industrial and shipping packaging;
Other goods;
Silage and haylage films;
Greenhouses with film coating
Processing Method
Extrusion
Areas of use
Cast films
MFI (g/10 min)
3.0 (2.16 kg)
Density (g/cm3)
0.920
Type of polymer
Metallocene LLDPE Linear low-density polyethylene (mLLDPE)
Special additives
Basic stabilization recipe with a processing additive
Principal characteristics
Metallocene grade with increased puncture resistance
Segment
Pipes
Processing Method
Extrusion
Areas of use
Pressure intra-house pipes for water supply and underfloor heating
MFI (g/10 min)
12.5 (at 21.6 kg)
Density (g/cm3)
0.938
Type of polymer
High-density polyethylene (HDPE)
Special additives
Enhanced stabilization
Principal characteristics
PE-RT Type 1 PE80 class product
Segment
Flexible packaging;
Food products;
Industrial and shipping packaging;
Other goods
Processing Method
Extrusion
Areas of use
High-strength sleeve and laminated film
MFI (g/10 min)
1.0 (2.16 kg)
Density (g/cm3)
0.918
Type of polymer
Linear low-density polyethylene (LLDPE)
Special additives
Basic stabilization recipe with a processing additive
Principal characteristics
Basic grade, triple copolymer of ethylene with butene and hexene
Segment
Packaging for infusion solutions, blisters, polymer cans
Processing Method
Extrusion blow molding
Areas of use
Ampoules and vials for injection/infusion solutions produced using the BFS (blow-fill-seal) technology
MFI (g/10 min)
0.30 (2.16 kg)
Density (g/cm3)
0.927
Type of polymer
Low-density polyethylene (LDPE)
Special additives
No additives
Principal characteristics
High-density grade that allows sterilization at up to 110 °C. Compliance with the requirements of the European Pharmacopoeia
Segment
Packaging for infusion solutions, blisters, polymer cans
Processing Method
Extrusion blow molding
Areas of use
Containers, tank-type vehicle components
MFI (g/10 min)
0.30 (2.16 kg)
Density (g/cm3)
0.958
Type of polymer
High-density polyethylene (HDPE)
Special additives
No additives
Principal characteristics
Bimodal grade. Balanced stress-strain properties, good processability and high resistance to cracking
Segment
Medical containers
Processing Method
Injection molding
Areas of use
Сaps, lids medical
MFI (g/10 min)
1.5
Density (g/cm3)
0.955
Type of polymer
High-density polyethylene (HDPE)
Principal characteristics
Basic recipe
Modulus of elasticity in bending, not less than, MPa
ав
Segment
Packaging for infusion solutions, blisters, polymer cans
Processing Method
Extrusion
Areas of use
Lamination of paper, cardboard, aluminum foil, for food-grade and non-food-grade packaging
MFI (g/10 min)
7.5
Density (g/cm3)
0.921
Type of polymer
Low-density polyethylene (LDPE)
Special additives
No additives
Principal characteristics
Basic polyethylene grade for coating at high application rates. Reduced extractables. Improved rheological properties of products
Segment
Pipes
Processing Method
Extrusion
Areas of use
General-purpose pipes
MFI (g/10 min)
8.5 (at 21.6 kg)
Density (g/cm3)
0.949
Type of polymer
High-density polyethylene (HDPE)
Special additives
Enhanced stabilization
Principal characteristics
A bimodal product similar to PE100. Long service life, high hydrolytic strength.
Segment
Geosynthetics
Processing Method
Extrusion
Areas of use
Pressure pipes and fittings for domestic water supply and gas distribution networks
MFI (g/10 min)
0.18 (5 kg)
Density (g/cm3)
0.959
Type of polymer
High-density polyethylene (HDPE)
Special additives
Enhanced stabilization, UV stabilizer
Principal characteristics
A bimodal product of PE100 class. Long service life, high hydrolytic strength. UV resistant.
Segment
Beverages;
Rigid packaging
Processing Method
Injection molding
Areas of use
Food-grade and industrial containers, pallets, caps, dispensers
MFI (g/10 min)
5.0 (2.16 kg)
Density (g/cm3)
0.953
Type of polymer
High-density polyethylene (HDPE)
Special additives
Basic stabilization recipe
Principal characteristics
Increased resistance to cracking
Segment
Flexible packaging;
Industrial and shipping packaging;
Other goods
Processing Method
Extrusion
Areas of use
Mono- and multilayer sleeve films, such as general purpose films, FFS films, agricultural films, consumer packaging films, bags
MFI (g/10 min)
0.40 (2.16 kg)
Density (g/cm3)
0.935
Type of polymer
РЕ
Special additives
Basic stabilization recipe
Principal characteristics
Polymer compound containing 60% of the secondary fraction from consumer waste (PCR waste). The grade is characterized by high manufacturability. Color: transparent gray
Segment
Flexible packaging;
Transparent food-grade films;
Other goods
Processing Method
Extrusion
Areas of use
Shrink film, agricultural films, FFS films, films for consumer packaging
MFI (g/10 min)
0.30 (2.16 kg)
Density (g/cm3)
0.925
Type of polymer
РЕ
Special additives
Basic stabilization recipe
Principal characteristics
Polymer compound containing 70% of the secondary fraction from consumer waste (PCR waste). The grade is characterized by high manufacturability. Color: transparent gray
Segment
Cable insulation
Processing Method
Extrusion
Areas of use
Outer sheath of power and telecommunications cables, outer coating of gas, oil and water pipelines
MFI (g/10 min)
0.45-0.50
Density (g/cm3)
0.946-0.948
Type of polymer
High-density polyethylene (HDPE)
Principal characteristics
The product is characterized by increased resistance to cracking, high strength and impact properties, as well as low temperature characteristics.
Polypropylene
Brand
Segment
Processing Method
Areas of use
MFI (g/10 min)
Min flexural modulus (MPa)
Min Izod impact strength, J/m
Type of polymer
Special additives
Principal characteristics
Additional parameters
Rigid packaging;
Food products
Thermoforming
Disposable tableware, containers, trays
1.6
1150
-
Polypropylene Block Copolymer (PPB)
Antistatic additive
Improved antistatic properties
Home care, cosmetics and personal care products
Injection molding
Packaging, buckets, containers, kitchenware
30
1150
-
Polypropylene Block Copolymer (PPB)
Nucleating agent, antistatic additive
Improved stress-strain properties, for the production of polymer products with high resistance to cracking and frost resistance (increased flexural modulus)
Automotive components
Injection molding
Compounding, automotive products
30
1150
at 23 ̊C, 77 at -20 ̊C — not standardized
Polypropylene Block Copolymer (PPB)
Nucleating agent, antistatic additive
Improved stress-strain properties, for the production of polymer products with high resistance to cracking and frost resistance (increased flexural modulus)
Pipes;
Animal house
Extrusion
Inhouse non-pressure pipes and fittings
0.70
1300
Polypropylene Homopolymer (PPH)
Enhanced stabilization
Increased melt strength
Pipes
Extrusion
Inhouse non-pressure pipes and fittings
3.0
1400
Polypropylene Homopolymer (PPH)
Basic recipe
Basic stabilization recipe
Geosynthetics
Extrusion
Woven geotextile, waterproofing membranes
3.0
1300
Polypropylene Homopolymer (PPH)
Basic stabilization recipe
Basic grade
Rigid packaging;
Beverages;
Food products;
Industrial and shipping packaging;
Fibers for aquaculture
Thermoforming
Trays for sealing, milk packaging, disposable tableware
3.0
1300
Polypropylene Homopolymer (PPH)
Basic stabilization recipe
Basic grade
Automotive components
Injection molding
Compounds for exterior, interior and engine compartment parts
3.0 (2.16 kg)
1300
Polypropylene Homopolymer (PPH)
Basic stabilization recipe
Basic grade
Production of consumer goods;
Industrial and shipping packaging
Extrusion
Soft woven packaging (bags, big bags)
3.0
1300
Polypropylene Homopolymer (PPH)
Basic stabilization recipe
Basic grade
Rigid packaging
Injection molding
Products with medium wall thickness
12
1500
Polypropylene Homopolymer (PPH)
Basic stabilization formulation
Base Brand
Rigid packaging;
Home care, cosmetics and personal care products;
Containers for seedlings
Injection molding
Thin-walled products with standard characteristics
25
1500
Polypropylene Homopolymer (PPH)
Basic stabilization recipe
Basic grade
Automotive components
Compounding
Compounds for exterior, interior and engine compartment parts
25
1500
Polypropylene Homopolymer (PPH)
Basic stabilization recipe
Basic grade
Geosynthetics;
Covering materials
Extrusion
Spunbond for road construction
27
1200
Polypropylene Homopolymer (PPH)
AGF stabilizer
High manufacturability, narrow molecular weight distribution, resistance to color change when exposed to the environment and excellent quality of finished products
Geosynthetics;
Covering materials
Extrusion
Spunbond for road construction
35
1200
Polypropylene Homopolymer (PPH)
AGF stabilizer
High manufacturability, narrow molecular weight distribution, resistance to color change when exposed to the environment and excellent quality of finished products
Rigid packaging;
Home care, cosmetics and personal care products
Injection molding
Thin-walled products with standard characteristics
35
1500
Polypropylene Homopolymer (PPH)
Basic stabilization recipe
Basic grade
Automotive components
Compounding
Compounds for the manufacture of exterior, interior and engine compartment parts
35
1500
Polypropylene Homopolymer (PPH)
Basic stabilization recipe
Basic grade
Rigid packaging;
Home care, cosmetics and personal care products
Injection molding
Thin-walled products with standard characteristics
45
1500
Polypropylene Homopolymer (PPH)
Basic stabilization recipe
Basic grade
Automotive components
Injection molding
Compounds for the manufacture of exterior, interior and engine compartment parts
45
1500
Polypropylene Homopolymer (PPH)
Basic stabilization recipe
Basic grade
Rigid packaging;
Food-grade containers, Water containers
Injection molding
Containers, kitchenware
12
1000
Polypropylene Block Copolymer (PPB)
Basic recipe
Basic grade
Automotive components;
Containers for seedlings
Injection molding
Vehicle components
12
1000
23 ̊C – 85; -20 ̊C – 35; -40 ̊C – not determined
Polypropylene Block Copolymer (PPB)
Basic recipe
Increased long-term thermal stability, resistance to thermo-oxidative degradation during processing and final product use
Packaging for infusion solutions, blisters, polymer cans
Extrusion blow molding
Vials for injection/infusion solutions produced using the BFS (blow-fill-seal) technology
1.8
900
Polypropylene Random Copolymer (PPR)
Basic stabilization recipe
High chemical purity. The sterilization temperature is 121 °C. Compliance with the requirements of the European Pharmacopoeia
Packaging for infusion solutions, blisters, polymer cans
Injection stretch blow molding
Vials for injection/infusion solutions
8.5
1050
Polypropylene Random Copolymer (PPR)
High chemical purity, good processability
Basic stabilization formulation
Rigid packaging;
Food products
Injection molding
Products with an average wall thickness
12
1500
-
Polypropylene Homopolymer (PPH)
Basic stabilization recipe
Basic grade
Syringes;
Packaging for infusion solutions, blisters, polymer cans
Injection molding
Thin-walled products with standard characteristics
25
1500
Polypropylene Homopolymer (PPH)
Basic stabilization recipe
Basic grade
Rigid packaging;
Food products
Injection molding
Products with an average wall thickness
12
1500
Polypropylene Homopolymer (PPH)
Basic stabilization recipe
Basic grade
Rigid packaging;
Food products
Injection molding
Products with an average wall thickness
12
1500
Polypropylene Homopolymer (PPH)
Basic stabilization recipe
Basic grade
Products of non-woven materials
Extrusion
Spunbond for hygienic, medical products
35
1200
Polypropylene Homopolymer (PPH)
AGF stabilizer
Spunbond for hygienic, medical products
Syringes;
Medical containers
Injection molding
Syringe cylinder
40
950
Polypropylene Random Copolymer (PPR)
Clarifier, slip agent and antistatic additive
A special grade for high-speed casting with high fluidity and transparency. Enhanced gloss of the product surface
Products of non-woven materials
Extrusion
Spunbond for hygienic, medical products
27
1200
Polypropylene Homopolymer (PPH)
AGF stabilizer
High processability, narrow molecular weight distribution, resistance to color change under the influence of the environment and excellent quality of finished products
Medical containers;
Syringes
Injection molding
Containers, vessels
45
1700
Polypropylene Homopolymer (PPH)
Clarifier, antistatic additive
A special grade for high-speed casting with increased transparency
Medical containers;
Syringes
Injection molding
Containers, vessels
55
1700
-
Polypropylene Homopolymer (PPH)
Nucleating agent, antistatic additive
A special grade for high-speed casting with high fluidity and increased rigidity
Medical containers;
Syringes
Injection molding
Containers, vessels
48
1200
Polypropylene Random Copolymer (PPR)
Clarifier, slip and antistatic additives
Products of non-woven materials
Extrusion
Spunbond for hygienic, medical products
27
1200
-
Polypropylene Homopolymer (PPH)
AGF stabilizer
Mephthalate-free, narrow molecular weight distribution, high processability, resistance to environmental color change, and excellent quality of the finished products
Medical containers;
Syringes
Injection molding
Containers, vessels
45
1800
-
Polypropylene Homopolymer (PPH)
Nucleating agent, antistatic additive
A special grade for high-speed casting with increased rigidity
Medical containers;
Syringes
Injection molding
Containers, vessels
60
950
Polypropylene Random Copolymer (PPR)
Clarifier, slip agent and antistatic additive
A special grade for high-speed casting with high fluidity and transparency. Enhanced gloss of the product surface
Syringes
Injection molding
Thin-walled products with high transparency (syringes, biomaterial containers)
80
950
Polypropylene Random Copolymer (PPR)
Clarifier, slip agent and antistatic additive
A special grade for high-speed casting with high fluidity and transparency. Enhanced gloss of the product surface
Products of non-woven materials
Extrusion
Meltblown nonwovens for medical and hygiene products
1200
Polypropylene Homopolymer (PPH)
Peroxide-free formulation
Rigid packaging;
Beverages
Compression molding
Caps for different purposes
2.5
1500
Polypropylene Homopolymer (PPH)
Nucleating agent, antistatic additive
A special mark for compression molding with high manufacturability, increased resistance to cracking, easy removal from the mold
Food products
Extrusion
Biaxially oriented mono- and multilayer films for food-grade and non-food-grade packaging; films with metallization
3.0
1400
Polypropylene Homopolymer (PPH)
Enhanced stabilization recipe, contains no metal stearates
The grade provides high line performance, process stability in a wide range of thicknesses, excellent optical properties and a stable profile of finished films
Rigid packaging;
Food products;
Containers for seedlings
Thermoforming
Trays for sealing, milk packaging, disposable tableware
3.0
1700
-
Polypropylene Homopolymer (PPH)
Nucleating agent, antistatic additive
A grade with improved stress-strain and thermal-physical properties that provide enhanced thermoforming line performance and product appearance
Production of consumer goods;
Industrial and shipping packaging;
Hay-knitting twine;
Roofing and waterproofing;
Geosynthetics
Extrusion
Soft woven packaging (bags, big bags, railcar liners, liner bags). Woven geotextile, waterproofing membranes
3.0
1400
Polypropylene Homopolymer (PPH)
A special recipe that provides low droplet entrainment
Grade with low droplet entrainment
Food products;
Rigid packaging
Extrusion
Biaxially oriented multilayer films for food-grade and non-food-grade packaging, including metallized with advanced requirements for different thickness
3.0
1400
Polypropylene Homopolymer (PPH)
Enhanced stabilization recipe, metal stearates and phthalates free
A modified grade that provides improved process stability at increased line performance, very low film thickness, balanced mechanical and improved optical properties of finished films. Meets the current requirements of end-users for the absence of phthalates
Food products;
Rigid packaging
Extrusion
Biaxially oriented mono- and multilayer films for food-grade and non-food-grade packaging; films with metallization
3.0
1500
Polypropylene Homopolymer (PPH)
Enhanced stabilization recipe, contains no metal stearates. Contains no phthalates
The grade provides high line performance, process stability in a wide range of thicknesses, excellent optical, strength properties and improved thickness profile stability of finished films. Meets the current requirements of end-users for the absence of phthalates
Rigid packaging;
Food products
Thermoforming
Trays for sealing, milk packaging, disposable tableware
3.0
1800
-
Polypropylene Homopolymer (PPH)
Nucleating agent, antistatic additive. Contains no phthalates
A grade with improved stress-strain and thermal-physical properties that provide enhanced thermoforming line performance and product appearance. The grade contains no phthalates, meeting the current requirements of end consumers
Rigid packaging;
Food products;
Containers for seedlings
Thermoforming
Sealing trays, milk packaging, disposable tableware, group packaging
3.0
2000
-
Polypropylene Homopolymer (PPH)
Nucleating agent, antistatic additive
A grade with a special stabilization recipe composition, providing high optical performance, improved stress-strain and thermal-physical properties, as well as enhanced thermoforming line performance and product appearance
Roofing and waterproofing;
Geosynthetics
Extrusion
Heavy thread for fabric production, woven geotextile, waterproofing membranes
4.3 (2.16 kg)
1400
Polypropylene Homopolymer (PPH)
A special recipe that provides low droplet entrainment
Processing at speeds up to 500 m/min, improved processability (reduced load on the extruder drive), increased processing stability, reduced droplet entrainment
Production of consumer goods;
Roofing and waterproofing;
Geosynthetics;
Industrial and shipping packaging;
Hay-knitting twine
Extrusion
Soft woven packaging (bags, big bags, railcar liners, liner bags)
4.3 (2.16 kg)
1400
Polypropylene Homopolymer (PPH)
A special recipe that provides low droplet entrainment
Processing at speeds up to 500 m/min, improved processability (reduced load on the extruder drive), increased processing stability, reduced droplet entrainment
Roofing and waterproofing;
Geosynthetics;
Industrial and shipping packaging
Extrusion
Lightweight thread for the production of lightweight fabric, woven geotextile, waterproofing membranes
6.0 (2.16 kg)
1300
Polypropylene Homopolymer (PPH)
A special recipe that provides low droplet entrainment
Processing at speeds up to 500 m/min, improved processability (reduced load on the extruder drive), increased processing stability, reduced droplet entrainment
Geosynthetics
Extrusion
Soft woven packaging (bags)
6.0 (2.16 kg)
1300
Polypropylene Homopolymer (PPH)
A special recipe that provides low droplet entrainment
Processing at speeds up to 500 m/min, improved processability (reduced load on the extruder drive), increased processing stability, reduced droplet entrainment
Flexible packaging;
Rigid packaging;
Food products;
Other goods
Extrusion
Non-metallized multilayer CPP films for food-grade (groceries, confectionery, bakery products, etc.) and non-food-grade packaging (flowers, stationery)
8.0
1300
Polypropylene Homopolymer (PPH)
Basic recipe
Standard molecular weight distribution of polymer and balanced stress-strain properties of finished film products
Flexible packaging;
Food products;
Other goods
Extrusion
Multilayer non-metallized CPP films for packaging and lamination of food products (groceries, bakery products, confectionery, etc.) and non-food-grade packaging (flowers, stationery)
8
1250
Polypropylene Homopolymer (PPH)
Basic recipe
Balanced stress-strain properties of finished film products
Flexible packaging;
Rigid packaging;
Food products;
Other goods
Extrusion
Multilayer metallized CPP films for food-grade (groceries, confectionery, bakery products, etc.) and non-food-grade packaging (flowers, stationery)
8.0
1300
Polypropylene Homopolymer (PPH)
Enhanced stabilization recipe
Improved consumer and stress-strain properties of finished film products
Flexible packaging;
Rigid packaging;
Food products;
Other goods
Extrusion
Multilayer non-metallized CPP films for packaging and lamination of food products (groceries, bakery products, confectionery, etc.) and non-food-grade packaging (flowers, stationery)
8.0
1300
Polypropylene Homopolymer (PPH)
Slip agent and anti-blocking additive
Improved slipping and anti-blocking properties of finished film products, high gloss and transparency
Geosynthetics
Extrusion
Continuous fiber and multifilaments, staple fiber for industrial applications (woven and nonwoven geotextiles, geomats, geogrid)
25 (2.16 kg)
1200
Polypropylene Homopolymer (PPH)
A special recipe with enhanced thermal stability of the melt and increased resistance to thermal oxidative degradation during the product use
High manufacturability, standard molecular weight distribution, resistance to color change when exposed to the environment and excellent quality of finished products
Non-woven materials, filament yarn
Extrusion
Interior accessories (continuous fiber and multifilament, carpet yarn products)
25 (2.16 kg)
1200
Polypropylene Homopolymer (PPH)
AGF stabilizer
High manufacturability and excellent quality of finished products
Geosynthetics
Extrusion
Continuous fiber and multifilaments, staple fiber for industrial applications (woven and non-woven geotextiles, geomats, geogrid)
25 (2.16 kg)
1200
Polypropylene Homopolymer (PPH)
Special recipe with enhanced melt thermal stability and increased resistance to thermal oxidative degradation during the product use
High manufacturability, standard molecular weight distribution, resistance to color change when exposed to the environment and excellent quality of finished products
Rigid packaging;
Home care, cosmetics and personal care products
Injection molding
Highly transparent thin-walled products
45
1700
Polypropylene Homopolymer (PPH)
Clarifier, antistatic additive
A special grade for high-speed casting with increased transparency
Rigid packaging;
Home care, cosmetics and personal care products;
Containers for seedlings
Injection molding
Thin-walled products of standard transparency with high rigidity
45
1800
-
Polypropylene Homopolymer (PPH)
Nucleating agent, antistatic additive
A special grade for high-speed casting with increased rigidity
Rigid packaging;
Home care, cosmetics and personal care products
Injection molding
Thin-walled products of standard transparency and complex geometry
55
1700
-
Polypropylene Homopolymer (PPH)
Nucleating agent, antistatic additive
A special grade for high-speed casting with high fluidity and increased rigidity
Pipes
Extrusion
Corrugated pipes
0.30 (2.16 kg)
1450
Polypropylene Block Copolymer (PPB)
Enhanced stabilization
High impact strength. Available for installation at temperatures below zero
Rigid packaging;
Food-grade containers, Water containers;
Food products
Thermoforming
Containers, kitchenware, packaging containers
1.6
1350
Polypropylene Block Copolymer (PPB)
Nucleating agent, antistatic additive
Improved stress-strain properties, for the production of polymer products with high resistance to cracking and frost resistance
Automotive components
Extrusion blow molding
Battery housings, automotive products made by extrusion and blow molding
1.6
1350
at 23 ̊C 500 at -20 ̊C — not standardized at -40 ̊C – not determined
Polypropylene Block Copolymer (PPB)
Nucleating agent, antistatic additive
Improved stress-strain properties, for the production of polymer products with high resistance to cracking and frost resistance
Rigid packaging;
Beverages
Injection molding
Caps for different purposes
6
1250
Polypropylene Block Copolymer (PPB)
Nucleating agent, sliding and antistatic additives
A special grade for compression molding with high manufacturability, increased resistance to cracking, easy removal from the mold
Automotive components
Injection molding
Battery cases, finishing materials for luggage bags, cables and wires
8
1100
23 ̊C – 90; -20 ̊C – 35; -40 ̊C – not determined
Polypropylene Block Copolymer (PPB)
Increased long-term thermal stability, improved resistance to thermal oxidative degradation in PP processing and product use
Rigid packaging;
Food products;
Other goods
Injection molding
Thick-walled non-transparent products
12
1350
-
Polypropylene Block Copolymer (PPB)
Nucleating agent
A special grade with balanced rigidity and impact resistance
Automotive components
Compounding
Compounds for exterior, interior and engine compartment parts
12
1350
-
Polypropylene Block Copolymer (PPB)
Nucleating agent
A special grade with balanced rigidity and impact resistance
Automotive components
Injection molding
Automotive products
12.5
1300
at 23 ̊C, 85 at -20 ̊C — not standardized at -40 ̊C – not determined
Polypropylene Block Copolymer (PPB)
-
Improved stress-strain properties for the production of polymer products with high resistance to cracking and frost resistance (increased flexural modulus)
Rigid packaging;
Home care, cosmetics and personal care products
Injection molding
Thin-walled non-transparent products
20
1150
Polypropylene Block Copolymer (PPB)
Nucleating agent, antistatic additive
A special grade for casting with increased rigidity, low warping
Rigid packaging;
Home care, cosmetics and personal care products
Injection molding
Thin-walled non-transparent products
45
1500
-
Polypropylene Block Copolymer (PPB)
Nucleating agent, antistatic additive
A special grade for high-speed casting with high processing speed, increased rigidity, low warping
Automotive components
Compounding
Compounds for exterior, interior and engine compartment parts
45
1500
-
Polypropylene Block Copolymer (PPB)
Nucleating agent, antistatic additive
A special grade for high-speed casting with high processing speed, increased rigidity, low warping
Rigid packaging;
Home care, cosmetics and personal care products;
Containers for seedlings
Injection molding
Thin-walled non-transparent products
42
1200
-
Polypropylene Block Copolymer (PPB)
Nucleating agent, antistatic additive
A special grade for high-speed casting with high processing speed, increased rigidity, low warping
Automotive components
Injection molding
Automotive parts
42
1200
Polypropylene Block Copolymer (PPB)
Nucleating agent, antistatic additive
A special grade for high-speed casting with high processing speed, increased rigidity, low warping
Rigid packaging;
Home care, cosmetics and personal care products
Injection molding
Packaging, buckets, containers, kitchenware
60
1300
-
Polypropylene Block Copolymer (PPB)
Nucleating agent, antistatic additive
A special grade for casting with high impact resistance
Rigid packaging;
Automotive components;
Food-grade containers, Water containers
Injection molding
Packaging, buckets, containers, kitchenware
80
1300
Polypropylene Block Copolymer (PPB)
Nucleating agent, antistatic additive
Improved stress-strain properties (flexural modulus and impact resistance balance)
Pipes
Extrusion
Domestic pressure pipes and fittings for water supply and heating
0.30 (2.16 kg)
800
Polypropylene Random Copolymer (PPR)
Enhanced stabilization
Hydrolytic strength
Rigid packaging
Extrusion blow molding
Vials for injection/infusion solutions produced using the BFS (blow-fill-seal) technology
1.8
900
Polypropylene Random Copolymer (PPR)
Basic stabilization recipe
High chemical purity. The sterilization temperature is 121 °C. Compliance with the requirements of the European Pharmacopoeia
Rigid packaging;
Food products;
Packaging for infusion solutions, blisters, polymer cans
Extrusion blow molding
Bottles, packaging containers and other large and medium-size hollow parts
1.8
950
-
Polypropylene Random Copolymer (PPR)
Clarifier
A special grade with enhanced transparency
Flexible packaging;
Food products;
Other goods
Extrusion
Multilayer non-metallized CPP films for packaging and lamination of food products (groceries, bakery products, confectionery, etc.) and non-food-grade packaging (flowers, stationery)
8,5
1050
Polypropylene Random Copolymer (PPR)
Slip agent, anti-blocking additive
Improved slipping and anti-blocking properties of finished film products, high gloss and transparency
Rigid packaging
Injection molding
Highly transparent thin-walled food-grade products (transparent containers, lids)
40
950
Polypropylene Random Copolymer (PPR)
Clarifier, slip agent and antistatic additive
A special grade for high-speed casting with high fluidity and transparency. Enhanced gloss of the product surface
Rigid packaging;
Home care, cosmetics and personal care products
Injection molding
Highly transparent thin-walled products
48
1050
-
Polypropylene Block Copolymer (PPB)
Clarifier, antistatic additive
A special grade for high-speed casting with high fluidity, transparency and processing speed
Rigid packaging;
Food-grade containers, Water containers
Injection molding
Highly transparent thin-walled food-grade products (transparent containers, lids)
60
950
Polypropylene Random Copolymer (PPR)
Clarifier, slip agent and antistatic additive
A special grade for high-speed casting with high fluidity and transparency. Enhanced gloss of the product surface
Rigid packaging;
Food-grade containers, Water containers
Injection molding
Highly transparent thin-walled food-grade products (transparent containers, lids)
80
950
Polypropylene Random Copolymer (PPR)
Clarifier, slip agent and antistatic additive
A special grade for high-speed casting with high fluidity and transparency. Enhanced gloss of the product surface
Rigid packaging;
Industrial and shipping packaging;
Other goods
Injection molding
Containers
4.0
1000
-
Polypropylene Block Copolymer (PPB)
Nucleating agent
A special grade for casting with high impact resistance
Rigid packaging;
Industrial and shipping packaging;
Other goods
Injection molding
Containers, lids
8.5
1000
-
Polypropylene Block Copolymer (PPB)
Nucleating agent
A special grade for casting with high impact resistance
Rigid packaging;
Food products;
Industrial and shipping packaging;
Other goods
Injection molding
High-quality food-grade packaging for freezing applications
11.5
1000
-
Polypropylene Block Copolymer (PPB)
Nucleating agent
Increased resistance to thermal oxidative degradation in the PP production process
Automotive components
Injection molding
Vehicle components
11.5
1000
at 23 ̊C, 400 at -20 ̊C, 60 at -40 ̊C – not determined
Polypropylene Block Copolymer (PPB)
Nucleating agent
Increased resistance to thermal oxidative degradation in the PP production process
Rigid packaging;
Food products;
Industrial and shipping packaging;
Other goods
Injection molding
Food-grade packaging
19
850
-
Polypropylene Block Copolymer (PPB)
Nucleating agent
Increased long-term thermal stability, resistance to thermal oxidative degradation during the PP production, its processing and product use. Efficient nucleation
Rigid packaging;
Industrial and shipping packaging;
Other goods
Injection molding
Packaging
20
850
-
Polypropylene Block Copolymer (PPB)
Nucleating agent, impact strength modifier
A special grade for casting with high impact resistance
Automotive components
Injection molding
Vehicle components
20
850
at 23 ̊C, 500 at — 20 ̊C, 80
Polypropylene Block Copolymer (PPB)
Nucleating agent, impact strength modifier
A special grade for casting with high impact resistance
Rigid packaging;
Home care, cosmetics and personal care products
Injection molding
Containers and buckets for non-food-grade products
33
1300
-
Polypropylene Block Copolymer (PPB)
Special stabilization recipe to improve organoleptic and stress-strain properties
Polymer compound containing 25% of the secondary fraction from consumer waste (PCR waste). The grade is characterized by reduced odor and high manufacturability. Color: grey
Segment
Rigid packaging;
Food products
Processing Method
Thermoforming
Areas of use
Disposable tableware, containers, trays
MFI (g/10 min)
1.6
Min flexural modulus (MPa)
1150
Min Izod impact strength, J/m
-
Type of polymer
Polypropylene Block Copolymer (PPB)
Special additives
Antistatic additive
Principal characteristics
Improved antistatic properties
Segment
Home care, cosmetics and personal care products
Processing Method
Injection molding
Areas of use
Packaging, buckets, containers, kitchenware
MFI (g/10 min)
30
Min flexural modulus (MPa)
1150
Min Izod impact strength, J/m
-
Type of polymer
Polypropylene Block Copolymer (PPB)
Special additives
Nucleating agent, antistatic additive
Principal characteristics
Improved stress-strain properties, for the production of polymer products with high resistance to cracking and frost resistance (increased flexural modulus)
Segment
Automotive components
Processing Method
Injection molding
Areas of use
Compounding, automotive products
MFI (g/10 min)
30
Min flexural modulus (MPa)
1150
Min Izod impact strength, J/m
at 23 ̊C, 77 at -20 ̊C — not standardized
Type of polymer
Polypropylene Block Copolymer (PPB)
Special additives
Nucleating agent, antistatic additive
Principal characteristics
Improved stress-strain properties, for the production of polymer products with high resistance to cracking and frost resistance (increased flexural modulus)
Segment
Pipes;
Animal house
Processing Method
Extrusion
Areas of use
Inhouse non-pressure pipes and fittings
MFI (g/10 min)
0.70
Min flexural modulus (MPa)
1300
Type of polymer
Polypropylene Homopolymer (PPH)
Special additives
Enhanced stabilization
Principal characteristics
Increased melt strength
Segment
Pipes
Processing Method
Extrusion
Areas of use
Inhouse non-pressure pipes and fittings
MFI (g/10 min)
3.0
Min flexural modulus (MPa)
1400
Type of polymer
Polypropylene Homopolymer (PPH)
Special additives
Basic recipe
Principal characteristics
Basic stabilization recipe
Segment
Geosynthetics
Processing Method
Extrusion
Areas of use
Woven geotextile, waterproofing membranes
MFI (g/10 min)
3.0
Min flexural modulus (MPa)
1300
Type of polymer
Polypropylene Homopolymer (PPH)
Special additives
Basic stabilization recipe
Principal characteristics
Basic grade
Segment
Rigid packaging;
Beverages;
Food products;
Industrial and shipping packaging;
Fibers for aquaculture
Processing Method
Thermoforming
Areas of use
Trays for sealing, milk packaging, disposable tableware
MFI (g/10 min)
3.0
Min flexural modulus (MPa)
1300
Type of polymer
Polypropylene Homopolymer (PPH)
Special additives
Basic stabilization recipe
Principal characteristics
Basic grade
Segment
Automotive components
Processing Method
Injection molding
Areas of use
Compounds for exterior, interior and engine compartment parts
MFI (g/10 min)
3.0 (2.16 kg)
Min flexural modulus (MPa)
1300
Type of polymer
Polypropylene Homopolymer (PPH)
Special additives
Basic stabilization recipe
Principal characteristics
Basic grade
Segment
Production of consumer goods;
Industrial and shipping packaging
Processing Method
Extrusion
Areas of use
Soft woven packaging (bags, big bags)
MFI (g/10 min)
3.0
Min flexural modulus (MPa)
1300
Type of polymer
Polypropylene Homopolymer (PPH)
Special additives
Basic stabilization recipe
Principal characteristics
Basic grade
Segment
Rigid packaging
Processing Method
Injection molding
Areas of use
Products with medium wall thickness
MFI (g/10 min)
12
Min flexural modulus (MPa)
1500
Type of polymer
Polypropylene Homopolymer (PPH)
Special additives
Basic stabilization formulation
Principal characteristics
Base Brand
Segment
Rigid packaging;
Home care, cosmetics and personal care products;
Containers for seedlings
Processing Method
Injection molding
Areas of use
Thin-walled products with standard characteristics
MFI (g/10 min)
25
Min flexural modulus (MPa)
1500
Type of polymer
Polypropylene Homopolymer (PPH)
Special additives
Basic stabilization recipe
Principal characteristics
Basic grade
Segment
Automotive components
Processing Method
Compounding
Areas of use
Compounds for exterior, interior and engine compartment parts
MFI (g/10 min)
25
Min flexural modulus (MPa)
1500
Type of polymer
Polypropylene Homopolymer (PPH)
Special additives
Basic stabilization recipe
Principal characteristics
Basic grade
Segment
Geosynthetics;
Covering materials
Processing Method
Extrusion
Areas of use
Spunbond for road construction
MFI (g/10 min)
27
Min flexural modulus (MPa)
1200
Type of polymer
Polypropylene Homopolymer (PPH)
Special additives
AGF stabilizer
Principal characteristics
High manufacturability, narrow molecular weight distribution, resistance to color change when exposed to the environment and excellent quality of finished products
Segment
Geosynthetics;
Covering materials
Processing Method
Extrusion
Areas of use
Spunbond for road construction
MFI (g/10 min)
35
Min flexural modulus (MPa)
1200
Type of polymer
Polypropylene Homopolymer (PPH)
Special additives
AGF stabilizer
Principal characteristics
High manufacturability, narrow molecular weight distribution, resistance to color change when exposed to the environment and excellent quality of finished products
Segment
Rigid packaging;
Home care, cosmetics and personal care products
Processing Method
Injection molding
Areas of use
Thin-walled products with standard characteristics
MFI (g/10 min)
35
Min flexural modulus (MPa)
1500
Type of polymer
Polypropylene Homopolymer (PPH)
Special additives
Basic stabilization recipe
Principal characteristics
Basic grade
Segment
Automotive components
Processing Method
Compounding
Areas of use
Compounds for the manufacture of exterior, interior and engine compartment parts
MFI (g/10 min)
35
Min flexural modulus (MPa)
1500
Type of polymer
Polypropylene Homopolymer (PPH)
Special additives
Basic stabilization recipe
Principal characteristics
Basic grade
Segment
Rigid packaging;
Home care, cosmetics and personal care products
Processing Method
Injection molding
Areas of use
Thin-walled products with standard characteristics
MFI (g/10 min)
45
Min flexural modulus (MPa)
1500
Type of polymer
Polypropylene Homopolymer (PPH)
Special additives
Basic stabilization recipe
Principal characteristics
Basic grade
Segment
Automotive components
Processing Method
Injection molding
Areas of use
Compounds for the manufacture of exterior, interior and engine compartment parts
MFI (g/10 min)
45
Min flexural modulus (MPa)
1500
Type of polymer
Polypropylene Homopolymer (PPH)
Special additives
Basic stabilization recipe
Principal characteristics
Basic grade
Segment
Rigid packaging;
Food-grade containers, Water containers
Processing Method
Injection molding
Areas of use
Containers, kitchenware
MFI (g/10 min)
12
Min flexural modulus (MPa)
1000
Type of polymer
Polypropylene Block Copolymer (PPB)
Special additives
Basic recipe
Principal characteristics
Basic grade
Segment
Automotive components;
Containers for seedlings
Processing Method
Injection molding
Areas of use
Vehicle components
MFI (g/10 min)
12
Min flexural modulus (MPa)
1000
Min Izod impact strength, J/m
23 ̊C – 85; -20 ̊C – 35; -40 ̊C – not determined
Type of polymer
Polypropylene Block Copolymer (PPB)
Special additives
Basic recipe
Principal characteristics
Increased long-term thermal stability, resistance to thermo-oxidative degradation during processing and final product use
Segment
Packaging for infusion solutions, blisters, polymer cans
Processing Method
Extrusion blow molding
Areas of use
Vials for injection/infusion solutions produced using the BFS (blow-fill-seal) technology
MFI (g/10 min)
1.8
Min flexural modulus (MPa)
900
Type of polymer
Polypropylene Random Copolymer (PPR)
Special additives
Basic stabilization recipe
Principal characteristics
High chemical purity. The sterilization temperature is 121 °C. Compliance with the requirements of the European Pharmacopoeia
Segment
Packaging for infusion solutions, blisters, polymer cans
Processing Method
Injection stretch blow molding
Areas of use
Vials for injection/infusion solutions
MFI (g/10 min)
8.5
Min flexural modulus (MPa)
1050
Type of polymer
Polypropylene Random Copolymer (PPR)
Principal characteristics
High chemical purity, good processability
Additional parameters
Basic stabilization formulation
Segment
Rigid packaging;
Food products
Processing Method
Injection molding
Areas of use
Products with an average wall thickness
MFI (g/10 min)
12
Min flexural modulus (MPa)
1500
Min Izod impact strength, J/m
-
Type of polymer
Polypropylene Homopolymer (PPH)
Special additives
Basic stabilization recipe
Principal characteristics
Basic grade
Segment
Syringes;
Packaging for infusion solutions, blisters, polymer cans
Processing Method
Injection molding
Areas of use
Thin-walled products with standard characteristics
MFI (g/10 min)
25
Min flexural modulus (MPa)
1500
Type of polymer
Polypropylene Homopolymer (PPH)
Special additives
Basic stabilization recipe
Principal characteristics
Basic grade
Segment
Rigid packaging;
Food products
Processing Method
Injection molding
Areas of use
Products with an average wall thickness
MFI (g/10 min)
12
Min flexural modulus (MPa)
1500
Type of polymer
Polypropylene Homopolymer (PPH)
Special additives
Basic stabilization recipe
Principal characteristics
Basic grade
Segment
Rigid packaging;
Food products
Processing Method
Injection molding
Areas of use
Products with an average wall thickness
MFI (g/10 min)
12
Min flexural modulus (MPa)
1500
Type of polymer
Polypropylene Homopolymer (PPH)
Special additives
Basic stabilization recipe
Principal characteristics
Basic grade
Segment
Products of non-woven materials
Processing Method
Extrusion
Areas of use
Spunbond for hygienic, medical products
MFI (g/10 min)
35
Min flexural modulus (MPa)
1200
Type of polymer
Polypropylene Homopolymer (PPH)
Special additives
AGF stabilizer
Principal characteristics
Spunbond for hygienic, medical products
Segment
Syringes;
Medical containers
Processing Method
Injection molding
Areas of use
Syringe cylinder
MFI (g/10 min)
40
Min flexural modulus (MPa)
950
Type of polymer
Polypropylene Random Copolymer (PPR)
Special additives
Clarifier, slip agent and antistatic additive
Principal characteristics
A special grade for high-speed casting with high fluidity and transparency. Enhanced gloss of the product surface
Segment
Products of non-woven materials
Processing Method
Extrusion
Areas of use
Spunbond for hygienic, medical products
MFI (g/10 min)
27
Min flexural modulus (MPa)
1200
Type of polymer
Polypropylene Homopolymer (PPH)
Special additives
AGF stabilizer
Principal characteristics
High processability, narrow molecular weight distribution, resistance to color change under the influence of the environment and excellent quality of finished products
Segment
Medical containers;
Syringes
Processing Method
Injection molding
Areas of use
Containers, vessels
MFI (g/10 min)
45
Min flexural modulus (MPa)
1700
Type of polymer
Polypropylene Homopolymer (PPH)
Special additives
Clarifier, antistatic additive
Principal characteristics
A special grade for high-speed casting with increased transparency
Segment
Medical containers;
Syringes
Processing Method
Injection molding
Areas of use
Containers, vessels
MFI (g/10 min)
55
Min flexural modulus (MPa)
1700
Min Izod impact strength, J/m
-
Type of polymer
Polypropylene Homopolymer (PPH)
Special additives
Nucleating agent, antistatic additive
Principal characteristics
A special grade for high-speed casting with high fluidity and increased rigidity
Segment
Medical containers;
Syringes
Processing Method
Injection molding
Areas of use
Containers, vessels
MFI (g/10 min)
48
Min flexural modulus (MPa)
1200
Type of polymer
Polypropylene Random Copolymer (PPR)
Principal characteristics
Clarifier, slip and antistatic additives
Segment
Products of non-woven materials
Processing Method
Extrusion
Areas of use
Spunbond for hygienic, medical products
MFI (g/10 min)
27
Min flexural modulus (MPa)
1200
Min Izod impact strength, J/m
-
Type of polymer
Polypropylene Homopolymer (PPH)
Special additives
AGF stabilizer
Principal characteristics
Mephthalate-free, narrow molecular weight distribution, high processability, resistance to environmental color change, and excellent quality of the finished products
Segment
Medical containers;
Syringes
Processing Method
Injection molding
Areas of use
Containers, vessels
MFI (g/10 min)
45
Min flexural modulus (MPa)
1800
Min Izod impact strength, J/m
-
Type of polymer
Polypropylene Homopolymer (PPH)
Special additives
Nucleating agent, antistatic additive
Principal characteristics
A special grade for high-speed casting with increased rigidity
Segment
Medical containers;
Syringes
Processing Method
Injection molding
Areas of use
Containers, vessels
MFI (g/10 min)
60
Min flexural modulus (MPa)
950
Type of polymer
Polypropylene Random Copolymer (PPR)
Special additives
Clarifier, slip agent and antistatic additive
Principal characteristics
A special grade for high-speed casting with high fluidity and transparency. Enhanced gloss of the product surface
Segment
Syringes
Processing Method
Injection molding
Areas of use
Thin-walled products with high transparency (syringes, biomaterial containers)
MFI (g/10 min)
80
Min flexural modulus (MPa)
950
Type of polymer
Polypropylene Random Copolymer (PPR)
Special additives
Clarifier, slip agent and antistatic additive
Principal characteristics
A special grade for high-speed casting with high fluidity and transparency. Enhanced gloss of the product surface
Segment
Products of non-woven materials
Processing Method
Extrusion
Areas of use
Meltblown nonwovens for medical and hygiene products
MFI (g/10 min)
1200
Type of polymer
Polypropylene Homopolymer (PPH)
Principal characteristics
Peroxide-free formulation
Segment
Rigid packaging;
Beverages
Processing Method
Compression molding
Areas of use
Caps for different purposes
MFI (g/10 min)
2.5
Min flexural modulus (MPa)
1500
Type of polymer
Polypropylene Homopolymer (PPH)
Special additives
Nucleating agent, antistatic additive
Principal characteristics
A special mark for compression molding with high manufacturability, increased resistance to cracking, easy removal from the mold
Segment
Food products
Processing Method
Extrusion
Areas of use
Biaxially oriented mono- and multilayer films for food-grade and non-food-grade packaging; films with metallization
MFI (g/10 min)
3.0
Min flexural modulus (MPa)
1400
Type of polymer
Polypropylene Homopolymer (PPH)
Special additives
Enhanced stabilization recipe, contains no metal stearates
Principal characteristics
The grade provides high line performance, process stability in a wide range of thicknesses, excellent optical properties and a stable profile of finished films
Segment
Rigid packaging;
Food products;
Containers for seedlings
Processing Method
Thermoforming
Areas of use
Trays for sealing, milk packaging, disposable tableware
MFI (g/10 min)
3.0
Min flexural modulus (MPa)
1700
Min Izod impact strength, J/m
-
Type of polymer
Polypropylene Homopolymer (PPH)
Special additives
Nucleating agent, antistatic additive
Principal characteristics
A grade with improved stress-strain and thermal-physical properties that provide enhanced thermoforming line performance and product appearance
Segment
Production of consumer goods;
Industrial and shipping packaging;
Hay-knitting twine;
Roofing and waterproofing;
Geosynthetics
Processing Method
Extrusion
Areas of use
Soft woven packaging (bags, big bags, railcar liners, liner bags). Woven geotextile, waterproofing membranes
MFI (g/10 min)
3.0
Min flexural modulus (MPa)
1400
Type of polymer
Polypropylene Homopolymer (PPH)
Special additives
A special recipe that provides low droplet entrainment
Principal characteristics
Grade with low droplet entrainment
Segment
Food products;
Rigid packaging
Processing Method
Extrusion
Areas of use
Biaxially oriented multilayer films for food-grade and non-food-grade packaging, including metallized with advanced requirements for different thickness
MFI (g/10 min)
3.0
Min flexural modulus (MPa)
1400
Type of polymer
Polypropylene Homopolymer (PPH)
Special additives
Enhanced stabilization recipe, metal stearates and phthalates free
Principal characteristics
A modified grade that provides improved process stability at increased line performance, very low film thickness, balanced mechanical and improved optical properties of finished films. Meets the current requirements of end-users for the absence of phthalates
Segment
Food products;
Rigid packaging
Processing Method
Extrusion
Areas of use
Biaxially oriented mono- and multilayer films for food-grade and non-food-grade packaging; films with metallization
MFI (g/10 min)
3.0
Min flexural modulus (MPa)
1500
Type of polymer
Polypropylene Homopolymer (PPH)
Special additives
Enhanced stabilization recipe, contains no metal stearates. Contains no phthalates
Principal characteristics
The grade provides high line performance, process stability in a wide range of thicknesses, excellent optical, strength properties and improved thickness profile stability of finished films. Meets the current requirements of end-users for the absence of phthalates