Housing construction
Housing construction
You can easily find the products you need by subcategories and using the navigation filter. Any product you want to download in PDF can be added by selecting it in the catalog.
Polyethylene
Segment
Cable insulation;
Geosynthetics
Geosynthetics
Processing Method
Extrusion
Areas of use
Overlay of sheaths - точно нормальный перевод?, protective covers of cables by extrusion
MFI (g/10 min)
0,30
Density (g/cm3)
0,921
Type of polymer
LDPE Low-density polyethylene (LDPE)
Special additives
Special formulation with enhanced thermal stability of the melt and increased resistance to thermal-oxidative degradation during product operation
Principal characteristics
The product is characterized by a special composition of the stabilization formula, which prevents the oxidation of the copper conductors of the product.
Segment
Cable insulation
Processing Method
Extrusion
Areas of use
Application of insulation, sheaths, protective covers of cables by extrusion
MFI (g/10 min)
0.30
Density (g/cm3)
0.919–0.922
Type of polymer
Low-density polyethylene (LDPE)
Special additives
A special recipe with enhanced thermal stability of the melt and increased resistance to thermal oxidative degradation during the product use
Principal characteristics
The product is characterized by a special composition of the stabilization recipe, with increased thermal oxidative stability.
Segment
Cable insulation
Processing Method
Extrusion
Areas of use
Application of insulation, sheaths, protective covers of cables by extrusion
MFI (g/10 min)
0.30
Type of polymer
Low-density polyethylene (LDPE)
Special additives
A special recipe with enhanced thermal stability of the melt and increased resistance to thermal oxidative degradation during the product use
Principal characteristics
The product is characterized by a special composition of the stabilization recipe, with increased thermal oxidative and photooxidative stability.
Segment
Cable insulation
Processing Method
Extrusion
Areas of use
Application of insulation, sheaths, protective covers of cables by extrusion
MFI (g/10 min)
0.3–0.65
Density (g/cm3)
0.950–0.955
Type of polymer
High-density polyethylene (HDPE)"
Special additives
A special recipe with enhanced thermal stability of the melt and increased resistance to thermal oxidative degradation during the product use
Principal characteristics
The product is characterized by a special composition of the stabilization recipe, with increased thermal oxidative stability.
Segment
Pipes
Processing Method
Extrusion
Areas of use
Pressure pipes and fittings for domestic water supply and gas distribution networks
MFI (g/10 min)
0,25 (5 kg)
Density (g/cm3)
0.959
Type of polymer
High-density polyethylene (HDPE)
Special additives
Enhanced stabilization, UV stabilizer
Principal characteristics
A bimodal product of PE100 class. Long service life, high hydrolytic strength. UV resistant.
Min flexural modulus (MPa)
1000
Segment
Pipes
Processing Method
Extrusion
Areas of use
Pressure pipes and fittings for an alternative method of laying according to PAS 1075
in domestic water supply and gas distribution networks
MFI (g/10 min)
0.30 (5 kg)
Density (g/cm3)
0.959
Type of polymer
High-density polyethylene (HDPE)
Special additives
Enhanced stabilization, UV stabilizer
Principal characteristics
A bimodal product of PE100 class. Long service life, high hydrolytic strength. UV resistant. High resistance to crack propagation.
Min flexural modulus (MPa)
1000
Segment
Transport infrastructure;
Housing construction;
Beverages;
Rigid packaging;
Geosynthetics;
Industrial and shipping packaging
Housing construction;
Beverages;
Rigid packaging;
Geosynthetics;
Industrial and shipping packaging
Processing Method
Injection molding
Areas of use
Food-grade and industrial containers, pallets, caps, dispensers
MFI (g/10 min)
7.5 (2.16 kg)
Density (g/cm3)
0.963
Type of polymer
High-density polyethylene (HDPE)
Special additives
Basic stabilization recipe with a processing additive
Principal characteristics
Basic grade
Segment
Pipes
Processing Method
Extrusion
Areas of use
Pressure intra-house pipes for water supply and underfloor heating
MFI (g/10 min)
12.5 (at 21.6 kg)
Density (g/cm3)
0.938
Type of polymer
High-density polyethylene (HDPE)
Special additives
Enhanced stabilization
Principal characteristics
PE-RT Type 1 PE80 class product
Segment
Pipes
Processing Method
Extrusion
Areas of use
General-purpose pipes
MFI (g/10 min)
8.5 (at 21.6 kg)
Density (g/cm3)
0.949
Type of polymer
High-density polyethylene (HDPE)
Special additives
Enhanced stabilization
Principal characteristics
A bimodal product similar to PE100. Long service life, high hydrolytic strength.
Segment
Cable insulation
Processing Method
Extrusion
Areas of use
Outer sheath of power and telecommunications cables, outer coating of gas, oil and water pipelines
MFI (g/10 min)
0.45-0.50
Density (g/cm3)
0.946-0.948
Type of polymer
High-density polyethylene (HDPE)
Principal characteristics
The product is characterized by increased resistance to cracking, high strength and impact properties, as well as low temperature characteristics.
ABS plastic
Segment
Household appliances, electronics, toys, tool making;
Manufacture of sanitary ware and panels;
Automotive components
Manufacture of sanitary ware and panels;
Automotive components
Processing Method
Thermal molding
Areas of use
Used in the automotive industry for interior decoration components.
Melt flow rate range, g/10min. (at 220 °C, 5kg load)
10.0 ±1.5
Min Vicat softening temperature (°C)
98
Tear resistance (MPa), NLT
40
Izod impact strength, notched (J/m), NLT
10
Bending strength (MPa), NLT
62
Mass fraction of residual styrene (%), NMT
0.05
Gloss at 60˚ angle, NLT
50
Principal characteristics
Average heat resistance, high fluidity and impact resistance, improved heat resistance during processing
Segment
Household appliances, electronics, toys, tool making;
Manufacture of sanitary ware and panels;
Automotive components
Manufacture of sanitary ware and panels;
Automotive components
Processing Method
Thermal molding
Areas of use
Used in the production of small and large household appliances, vacuum cleaners, toys, phones and consumer electronics.
Melt flow rate range, g/10min. (at 220 °C, 5kg load)
23 ±3.0
Min Vicat softening temperature (°C)
90
Izod impact strength, notched (J/m), NLT
11
Mass fraction of residual styrene (%), NMT
0.05
Gloss at 60˚ angle, NLT
60
Principal characteristics
Injection molding general-purpose grade with high fluidity, combines high impact strength with excellent gloss