Polyethylene

Polyethylene
You can easily find the products you need by subcategories and using the navigation filter. Any product you want to download in PDF can be added by selecting it in the catalog.
Polyethylene
Brand
Segment
Flexible packaging;
Food products;
Industrial and shipping packaging;
Other goods;
Covering materials;
Silage and haylage films;
Greenhouses with film coating
Processing Method
Extrusion
Areas of use
Films for food-grade and non-food-grade packaging
MFI (g/10 min)
2.0 (2.16 kg)
Density (g/cm3)
0.919
Type of polymer
Low-density polyethylene (LDPE)
Special additives
No additives
Principal characteristics
Basic polyethylene grade for film production
Segment
Flexible packaging;
Food products;
Other goods
Processing Method
Extrusion
Areas of use
Lamination of paper, cardboard, aluminum foil, for food-grade and non-food-grade packaging
MFI (g/10 min)
7.0
Density (g/cm3)
0.918
Type of polymer
Low-density polyethylene (LDPE)
Special additives
No additives
Principal characteristics
Basic polyethylene grade for film production, coating at low application rates
Segment
Cable insulation;
Geosynthetics
Processing Method
Extrusion
Areas of use
Overlay of sheaths - точно нормальный перевод?, protective covers of cables by extrusion
MFI (g/10 min)
0,30
Density (g/cm3)
0,921
Type of polymer
LDPE Low-density polyethylene (LDPE)
Special additives
Special formulation with enhanced thermal stability of the melt and increased resistance to thermal-oxidative degradation during product operation
Principal characteristics
The product is characterized by a special composition of the stabilization formula, which prevents the oxidation of the copper conductors of the product.
Segment
Cable insulation
Processing Method
Extrusion
Areas of use
Application of insulation, sheaths, protective covers of cables by extrusion
MFI (g/10 min)
0.30
Density (g/cm3)
0.919–0.922
Type of polymer
Low-density polyethylene (LDPE)
Special additives
A special recipe with enhanced thermal stability of the melt and increased resistance to thermal oxidative degradation during the product use
Principal characteristics
The product is characterized by a special composition of the stabilization recipe, with increased thermal oxidative stability.
Segment
Cable insulation
Processing Method
Extrusion
Areas of use
Application of insulation, sheaths, protective covers of cables by extrusion
MFI (g/10 min)
0.30
Type of polymer
Low-density polyethylene (LDPE)
Special additives
A special recipe with enhanced thermal stability of the melt and increased resistance to thermal oxidative degradation during the product use
Principal characteristics
The product is characterized by a special composition of the stabilization recipe, with increased thermal oxidative and photooxidative stability.
Segment
Flexible packaging;
Food products;
Industrial and shipping packaging;
Other goods;
Sleeves for grain storage;
Silage and haylage films;
Greenhouses with film coating
Processing Method
Extrusion
Areas of use
Shrink films, films for food-grade and non-food-grade packaging
MFI (g/10 min)
0.30 (2.16 kg)
Density (g/cm3)
0.921
Type of polymer
Low-density polyethylene (LDPE)
Special additives
No additives
Principal characteristics
Basic polyethylene grade for film production
Segment
Flexible packaging;
Food products;
Industrial and shipping packaging;
Other goods;
Sleeves for grain storage;
Silage and haylage films;
Greenhouses with film coating
Processing Method
Extrusion
Areas of use
Shrink films, films for food-grade and non-food-grade packaging
MFI (g/10 min)
0.30 (2.16 kg)
Density (g/cm3)
0.921
Type of polymer
Low-density polyethylene (LDPE)
Special additives
No additives
Principal characteristics
Basic polyethylene grade for film production
Segment
Flexible packaging;
Food products;
Industrial and shipping packaging;
Other goods;
Covering materials;
Silage and haylage films;
Greenhouses with film coating
Processing Method
Extrusion
Areas of use
Films for food-grade and non-food-grade packaging
MFI (g/10 min)
2.0 (2.16 kg)
Density (g/cm3)
0.919
Type of polymer
Low-density polyethylene (LDPE)
Special additives
No additives
Principal characteristics
Basic grade for film production. Excellent compatibility with LLDPE
Segment
Flexible packaging;
Food products;
Industrial and shipping packaging;
Other goods;
Covering materials;
Silage and haylage films;
Greenhouses with film coating
Processing Method
Extrusion
Areas of use
Films for food-grade and non-food-grade packaging
MFI (g/10 min)
2.0 (2.16 kg)
Density (g/cm3)
0.919
Type of polymer
Low-density polyethylene (LDPE)
Special additives
No additives
Principal characteristics
Basic polyethylene grade for film production
Segment
Cable insulation
Processing Method
Extrusion
Areas of use
Application of insulation, sheaths, protective covers of cables by extrusion
MFI (g/10 min)
0.3–0.65
Density (g/cm3)
0.950–0.955
Type of polymer
High-density polyethylene (HDPE)"
Special additives
A special recipe with enhanced thermal stability of the melt and increased resistance to thermal oxidative degradation during the product use
Principal characteristics
The product is characterized by a special composition of the stabilization recipe, with increased thermal oxidative stability.
Segment
Rigid packaging;
Food-grade containers, Water containers
Processing Method
Extrusion blow molding
Areas of use
Containers (bottles, cans) up to 50 liters
MFI (g/10 min)
1,1 (5 kg)
Density (g/cm3)
0,959
Type of polymer
High-density polyethylene (HDPE)
Special additives
Basic stabilization formulation
Principal characteristics
Bimodal brand with increased resistance to cracking
Segment
Geosynthetics
Processing Method
Extrusion
Areas of use
General-purpose pipes
MFI (g/10 min)
0.30 (5 kg)
Density (g/cm3)
0.949
Type of polymer
High-density polyethylene (HDPE)
Special additives
Enhanced stabilization
Principal characteristics
A bimodal product of PE100 class. Long service life, high hydrolytic strength
Min flexural modulus (MPa)
1000
Segment
Pipes
Processing Method
Extrusion
Areas of use
Pressure pipes and fittings for domestic water supply and gas distribution networks
MFI (g/10 min)
0,25 (5 kg)
Density (g/cm3)
0.959
Type of polymer
High-density polyethylene (HDPE)
Special additives
Enhanced stabilization, UV stabilizer
Principal characteristics
A bimodal product of PE100 class. Long service life, high hydrolytic strength. UV resistant.
Min flexural modulus (MPa)
1000
Segment
Pipes
Processing Method
Extrusion
Areas of use
Pressure pipes and fittings for an alternative method of laying according to PAS 1075 in domestic water supply and gas distribution networks
MFI (g/10 min)
0.30 (5 kg)
Density (g/cm3)
0.959
Type of polymer
High-density polyethylene (HDPE)
Special additives
Enhanced stabilization, UV stabilizer
Principal characteristics
A bimodal product of PE100 class. Long service life, high hydrolytic strength. UV resistant. High resistance to crack propagation.
Min flexural modulus (MPa)
1000
Segment
Rigid packaging;
Food-grade containers, Water containers
Processing Method
Extrusion blow molding
Areas of use
Containers up to 20 liters for storage and transportation of household chemicals, oils, liquid food products
MFI (g/10 min)
0,20 (2,16 kg)
Density (g/cm3)
0,955
Type of polymer
High-density polyethylene (HDPE)
Special additives
Basic stabilization formulation
Principal characteristics
Medium molecular weight brand. Balanced physical and mechanical properties, good recyclability and excellent resistance to cracking
Segment
Automotive components;
Home care, cosmetics and personal care products;
Rigid packaging;
Food-grade containers, Water containers;
Sleeves for grain storage
Processing Method
Extrusion blow molding
Areas of use
Containers, tank-type vehicle components
MFI (g/10 min)
0.30 (2.16 kg)
Density (g/cm3)
0.958
Type of polymer
High-density polyethylene (HDPE)
Special additives
No additives
Principal characteristics
Bimodal grade. Balanced stress-strain properties, good processability and high resistance to cracking
Segment
Geosynthetics
Processing Method
Extrusion
Areas of use
Geosynthetic materials (geogrids, geomembranes, road construction sheets, construction sheets)
MFI (g/10 min)
0.30 (2.16 kg)
Density (g/cm3)
0.958
Type of polymer
High-density polyethylene (HDPE)
Special additives
No additives
Principal characteristics
Bimodal grade. Balanced stress-strain properties, good processability and high resistance to cracking
Segment
Food-grade containers, Water containers
Processing Method
Extrusion blow molding
Areas of use
Capacity from 1.5 to 5 liters
MFI (g/10 min)
1,7 (5 kg)
Density (g/cm3)
0,952
Type of polymer
High-density polyethylene (HDPE)
Special additives
Basic stabilization formulation
Principal characteristics
Medium molecular weight brand. Balanced physical and mechanical properties, good recyclability and excellent resistance to cracking
Segment
Flexible packaging;
Other goods;
Sleeves for grain storage
Processing Method
Extrusion
Areas of use
Bags, packing, industrial packaging
MFI (g/10 min)
10 (21.6 kg)
Density (g/cm3)
0.950
Type of polymer
High-density polyethylene (HDPE)
Special additives
Basic stabilization recipe
Principal characteristics
Extensive molecular weight distribution, high melt strength, high film tensile strength, puncture and tear resistance.
Segment
Geosynthetics;
Covering materials
Processing Method
Extrusion
Areas of use
Geosynthetic materials (geogrids, geomembranes, road construction sheets, construction sheets)
MFI (g/10 min)
10 (21.6 kg)
Density (g/cm3)
0.950
Type of polymer
High-density polyethylene (HDPE)
Special additives
Basic stabilization recipe
Principal characteristics
Extensive molecular weight distribution, high melt strength, high film tensile strength, puncture and tear resistance.
Segment
Rigid packaging;
Industrial and shipping packaging
Processing Method
Extrusion
Areas of use
Vessels (canisters, containers, barrels) up to 227 L for aggressive substance storage
MFI (g/10 min)
10 (21.6 kg)
Density (g/cm3)
0.953
Type of polymer
High-density polyethylene (HDPE)
Special additives
No additives
Principal characteristics
High molecular weight grade. Balanced stress-strain properties, high rigidity and resistance to cracking
Segment
Geosynthetics
Processing Method
Extrusion blow molding
Areas of use
Geosynthetic materials (geogrids, geomembranes, road construction sheets, construction sheets)
MFI (g/10 min)
10 (21.6 kg)
Density (g/cm3)
0.953
Type of polymer
High-density polyethylene (HDPE)
Special additives
No additives
Principal characteristics
High molecular weight grade. Balanced stress-strain properties, high rigidity and resistance to cracking
Segment
Geosynthetics;
Covering materials
Processing Method
Extrusion
Areas of use
Geosynthetic materials (geogrids, geomembranes, road sheets, building sheets)
MFI (g/10 min)
0.70 (5 kg)
Density (g/cm3)
0.946
Type of polymer
High-density polyethylene (HDPE)
Special additives
Enhanced stabilization recipe with a processing additive
Principal characteristics
Extensive molecular weight distribution, high melt strength, high film tensile strength, puncture and tear resistance.
Segment
Flexible packaging;
Industrial and shipping packaging;
Other goods;
Food products
Processing Method
Extrusion
Areas of use
Bags, packing, industrial packaging
MFI (g/10 min)
0.70 (5 kg)
Density (g/cm3)
0.946
Type of polymer
High-density polyethylene (HDPE)
Special additives
Enhanced stabilization recipe with a processing additive
Principal characteristics
Extensive molecular weight distribution, high melt strength, high film tensile strength, puncture and tear resistance.
Segment
Rigid packaging;
Food-grade containers, Water containers
Processing Method
Extrusion blow molding
Areas of use
Vessels (cans, containers, barrels) up to 200 L
MFI (g/10 min)
0.50 (2.16 kg)
Density (g/cm3)
0.952
Type of polymer
High-density polyethylene (HDPE)
Special additives
No additives
Principal characteristics
High molecular weight grade. Balanced stress-strain properties.
Segment
Geosynthetics
Processing Method
Extrusion
Areas of use
Geosynthetic materials (geogrids, geomembranes, road construction sheets, construction sheets)
MFI (g/10 min)
0.50 (2.16 kg)
Density (g/cm3)
0.952
Type of polymer
High-density polyethylene (HDPE)
Special additives
No additives
Principal characteristics
High molecular weight grade. Balanced stress-strain properties.
Segment
Geosynthetics
Processing Method
Extrusion
Areas of use
Geosynthetic materials (geogrids, geomembranes, road sheets, building sheets)
MFI (g/10 min)
0.53 (5 kg)
Density (g/cm3)
0.951
Type of polymer
High-density polyethylene (HDPE)
Special additives
Enhanced stabilization recipe with a processing additive
Principal characteristics
High resistance to cracking and stress-strain properties
Segment
Flexible packaging;
Industrial and shipping packaging;
Food products;
Other goods
Processing Method
Extrusion
Areas of use
Thin films (less than 10 microns), bags, packaging, industrial packaging. Available for use in a mixture with low-flow grades of low-density polyethylene in the recipes of shrink films, films for packaging heavy loads
MFI (g/10 min)
0.53 (5 kg)
Density (g/cm3)
0.951
Type of polymer
High-density polyethylene (HDPE)
Special additives
Enhanced stabilization recipe with a processing additive
Principal characteristics
High resistance to cracking and stress-strain properties
Segment
Beverages;
Food industry;
Industrial and shipping packaging
Processing Method
Injection molding
Areas of use
Food and industrial containers, pallets, caps, dispensers
MFI (g/10 min)
13 (2,16 kg)
Density (g/cm3)
0,963
Type of polymer
High-density polyethylene (HDPE)
Special additives
Basic stabilization formulation
Principal characteristics
Base brand
Min flexural modulus (MPa)
-
Segment
Rigid packaging;
Beverages;
Industrial and shipping packaging;
Packaging for infusion solutions, blisters, polymer cans
Processing Method
Thermal molding
Areas of use
Food-grade and industrial containers, pallets, containers, boxes, caps
MFI (g/10 min)
4.5 (2.16 kg)
Density (g/cm3)
0.953
Type of polymer
High-density polyethylene (HDPE)
Special additives
UV stabilizer
Principal characteristics
Grade with a special recipe composition (UV)
Segment
Flexible packaging;
Food products;
Industrial and shipping packaging;
Other goods
Processing Method
Extrusion
Areas of use
Thin films (less than 10 microns), bags, packaging, industrial packaging. Available for use in a mixture with low-flow grades of low-density polyethylene in the recipes of shrink films, films for packaging heavy loads
MFI (g/10 min)
8.0 (21.6 kg)
Density (g/cm3)
0.952
Type of polymer
High-density polyethylene (HDPE)
Special additives
Basic stabilization recipe
Principal characteristics
Bimodal grade. Improved balance of mechanical properties combined with good processability, high strength performance and stability of the film sleeve
Segment
Transport infrastructure;
Housing construction;
Beverages;
Rigid packaging;
Geosynthetics;
Industrial and shipping packaging
Processing Method
Injection molding
Areas of use
Food-grade and industrial containers, pallets, caps, dispensers
MFI (g/10 min)
7.5 (2.16 kg)
Density (g/cm3)
0.963
Type of polymer
High-density polyethylene (HDPE)
Special additives
Basic stabilization recipe with a processing additive
Principal characteristics
Basic grade
Segment
Beverages;
Industrial and shipping packaging;
Containers for seedlings;
Irrigation and land reclamation
Processing Method
Injection molding
Areas of use
Food and industrial containers, pallets, caps, dispensers
MFI (g/10 min)
7,5 (2,16 kg)
Density (g/cm3)
0,963
Type of polymer
High-density polyethylene (HDPE)
Special additives
UV stabilizer, processing additive
Principal characteristics
Brand with special formulation composition (UV)
Min flexural modulus (MPa)
-
Segment
Flexible packaging;
Food products;
Industrial and shipping packaging;
Other goods;
Silage and haylage films;
Greenhouses with film coating
Processing Method
Extrusion
Areas of use
Shrink films, films for food-grade and non-food-grade packaging
MFI (g/10 min)
0.30 (2.16 kg)
Density (g/cm3)
0.926
Type of polymer
Low-density polyethylene (LDPE)
Special additives
No additives
Principal characteristics
A special grade with improved optical properties and tear resistance
Segment
Rigid packaging
Processing Method
Extrusion blow molding
Areas of use
Ampoules and vials for injection/infusion solutions produced using the BFS (blow-fill-seal) technology
MFI (g/10 min)
0.30 (2.16 kg)
Density (g/cm3)
0.927
Type of polymer
Low-density polyethylene (LDPE)
Special additives
No additives
Principal characteristics
High-density grade that allows sterilization at up to 110 °C. Compliance with the requirements of the European Pharmacopoeia
Segment
Rigid packaging
Processing Method
Extrusion blow molding
Areas of use
Ampoules and vials for injection/infusion solutions produced using the BFS (blow-fill-seal) technology
MFI (g/10 min)
0.30 (2.16 kg)
Density (g/cm3)
0.927
Type of polymer
Low-density polyethylene (LDPE)
Special additives
No additives
Principal characteristics
High-density grade that allows sterilization at up to 110 °C. Compliance with the requirements of the European Pharmacopoeia
Segment
Flexible packaging;
Food products;
Industrial and shipping packaging;
Other goods;
Silage and haylage films;
Greenhouses with film coating
Processing Method
Extrusion
Areas of use
Multilayer films for lamination, general purpose films
MFI (g/10 min)
0.80 (2.16 kg)
Density (g/cm3)
0.923
Type of polymer
Low-density polyethylene (LDPE)
Special additives
No additives
Principal characteristics
A special grade with improved optical properties. Excellent compatibility with LLDPE
Segment
Flexible packaging;
Food products;
Industrial and shipping packaging;
Other goods;
Silage and haylage films;
Greenhouses with film coating
Processing Method
Extrusion
Areas of use
Films for food-grade and non-food-grade packaging
MFI (g/10 min)
2.0 (2.16 kg)
Density (g/cm3)
0.926
Type of polymer
Low-density polyethylene (LDPE)
Special additives
No additives
Principal characteristics
A special grade with improved optical properties. Excellent compatibility with LLDPE
Segment
Flexible packaging;
Food products;
Other goods
Processing Method
Extrusion
Areas of use
Extrusion coating of paper, cardboard
MFI (g/10 min)
4.0
Density (g/cm3)
0.920
Type of polymer
Low-density polyethylene (LDPE)
Special additives
No additives
Principal characteristics
A special grade for extrusion coatings enables the increase in the output (increase in the irrigation rate by 10–20%, reducing the consumption of irrigation material by 10–15%), stable watering at high speeds, low level of characteristic smoking, reduction in irrigation unevenness, low edge beating
Segment
Automotive components
Processing Method
Foaming
Areas of use
Foamed polyethylene for automobile interior decoration
MFI (g/10 min)
4.0
Density (g/cm3)
0.920
Type of polymer
Low-density polyethylene (LDPE)
Special additives
No additives
Principal characteristics
A special grade for foaming. Enables the increase in the output, obtaining a more uniform foam structure with intense color
Segment
Flexible packaging;
Food products
Processing Method
Extrusion
Areas of use
Highly transparent mono- and multilayer cast food-grade films (including sealed packaging)
MFI (g/10 min)
4,0 (2,16 kg)
Density (g/cm3)
0,925
Type of polymer
Low-density polyethylene (LDPE)
Special additives
Antioxidant
Principal characteristics
Excellent optical properties, good processability
Segment
Flexible packaging;
Food products;
Other goods
Processing Method
Extrusion
Areas of use
Lamination of paper, cardboard, aluminum foil, for food-grade and non-food-grade packaging
MFI (g/10 min)
5.0
Density (g/cm3)
0.921
Type of polymer
Low-density polyethylene (LDPE)
Special additives
No additives
Principal characteristics
Basic polyethylene grade for coating at high application rates. Reduced extractables. Improved rheological properties of products
Segment
Flexible packaging;
Food products;
Other goods
Processing Method
Extrusion
Areas of use
Lamination of paper, cardboard, aluminum foil, for food-grade and non-food-grade packaging
MFI (g/10 min)
7.5
Density (g/cm3)
0.921
Type of polymer
Low-density polyethylene (LDPE)
Special additives
No additives
Principal characteristics
Basic polyethylene grade for coating at high application rates. Reduced extractables. Improved rheological properties of products
Segment
Flexible packaging;
Food products;
Industrial and shipping packaging;
Other goods;
Silage and haylage films
Processing Method
Extrusion
Areas of use
High-strength stretch film
MFI (g/10 min)
3.0 (2.16 kg)
Density (g/cm3)
0.918
Type of polymer
Linear low-density polyethylene (LLDPE)
Special additives
Basic stabilization recipe with a processing additive
Principal characteristics
Basic grade, triple copolymer of ethylene with butene and hexene
Segment
Packaging;
Flexible packaging;
Transparent non-food-grade films;
Silage and haylage films;
Greenhouses with film coating
Areas of use
Multilayer sleeve films: general purpose films, consumer packaging films, FFS films, lamination films, agricultural films
MFI (g/10 min)
0,3 (2,16)
Density (g/cm3)
0,932
Type of polymer
Linear low-density polyethylene (LLDPE)
Special additives
Basic recipe for stabilization
Principal characteristics
Balanced physical and mechanical properties combined with good recyclability. High strength indicators
Segment
Geosynthetics
Processing Method
Extrusion
Areas of use
Geomembranes
MFI (g/10 min)
0.9 (2.16 kg)
Density (g/cm3)
0.920
Type of polymer
Linear low-density polyethylene (LLDPE)
Special additives
Basic stabilization recipe
Principal characteristics
Balanced combination of physicomechanical and optical properties. High strength performance, resistance to punctures, excellent weldability Excellent compatibility with LDPE
Segment
Flexible packaging;
Food products;
Covering materials;
Sleeves for grain storage;
Silage and haylage films;
Greenhouses with film coating
Processing Method
Extrusion
Areas of use
Films for food-grade and non-food-grade packaging, laminating films, coating films for sealing, industrial films, shopping bags and garbage bags
MFI (g/10 min)
0.9 (2.16 kg)
Density (g/cm3)
0.920
Type of polymer
Linear low-density polyethylene (LLDPE)
Special additives
Basic stabilization recipe
Principal characteristics
Balanced combination of physicomechanical and optical properties. High strength performance, resistance to punctures, excellent weldability Excellent compatibility with LDPE
Segment
Geosynthetics
Processing Method
Extrusion
Areas of use
Geomembranes
MFI (g/10 min)
2.0 (2.16 kg)
Density (g/cm3)
0.920
Type of polymer
Linear low-density polyethylene (LLDPE)
Special additives
Basic stabilization recipe
Principal characteristics
Balanced combination of physicomechanical and optical properties. High strength performance. Excellent compatibility with LDPE
Segment
Flexible packaging;
Food products;
Other goods;
Covering materials;
Silage and haylage films;
Greenhouses with film coating
Processing Method
Extrusion
Areas of use
General purpose packaging films, lamination films, sealable coating films, agricultural films, bags
MFI (g/10 min)
2.0 (2.16 kg)
Density (g/cm3)
0.920
Type of polymer
Linear low-density polyethylene (LLDPE)
Special additives
Basic stabilization recipe
Principal characteristics
Balanced combination of physicomechanical and optical properties. High strength performance. Excellent compatibility with LDPE
Segment
Flexible packaging;
Food products;
Other goods;
Silage and haylage films;
Greenhouses with film coating
Processing Method
Extrusion
Areas of use
General purpose packaging films, lamination films, bags
MFI (g/10 min)
2.0 (2.16 kg)
Density (g/cm3)
0.921
Type of polymer
Linear low-density polyethylene (LLDPE)
Special additives
Slip agent and anti-blocking additive
Principal characteristics
Improved physicomechanical and optical properties. High strength performance, excellent anti-blocking and slipping properties of the finished film products. Excellent compatibility with LDPE
Segment
Flexible packaging;
Food products;
Industrial and shipping packaging;
Other goods;
Covering materials;
Silage and haylage films
Processing Method
Extrusion
Areas of use
General purpose packaging films, lamination films, sealable coating films, agricultural films, bags
MFI (g/10 min)
3.0 (2.16 kg)
Density (g/cm3)
0.919
Type of polymer
Linear low-density polyethylene (LLDPE)
Special additives
Basic stabilization recipe
Principal characteristics
Balanced combination of physicomechanical and optical properties. The properties and the structure of the polymer ensure high extrusion line performance
Segment
Flexible packaging;
Food products;
Industrial and shipping packaging;
Other goods;
Silage and haylage films
Processing Method
Extrusion
Areas of use
Cast films
MFI (g/10 min)
3.0 (2.16 kg)
Density (g/cm3)
0.920
Type of polymer
Linear low-density polyethylene (LLDPE)
Special additives
Basic stabilization recipe with a processing additive
Principal characteristics
Basic grade for use both in pure form and in mixtures with LDPE and HDPE
Segment
Flexible packaging;
Food products;
Industrial and shipping packaging;
Other goods;
Sleeves for grain storage;
Silage and haylage films;
Polycarbonate greenhouses;
Greenhouses with film coating
Processing Method
Extrusion
Areas of use
Various film materials
MFI (g/10 min)
1.0 (2.16 kg)
Density (g/cm3)
0.920
Type of polymer
Metallocene LLDPE Linear low-density polyethylene (mLLDPE)
Special additives
Basic stabilization recipe with a processing additive
Principal characteristics
Metallocene grade with increased puncture resistance
Segment
Flexible packaging;
Food products;
Industrial and shipping packaging;
Other goods;
Silage and haylage films;
Greenhouses with film coating
Processing Method
Extrusion
Areas of use
Cast films
MFI (g/10 min)
3.0 (2.16 kg)
Density (g/cm3)
0.920
Type of polymer
Metallocene LLDPE Linear low-density polyethylene (mLLDPE)
Special additives
Basic stabilization recipe with a processing additive
Principal characteristics
Metallocene grade with increased puncture resistance
Segment
Pipes
Processing Method
Extrusion
Areas of use
Pressure intra-house pipes for water supply and underfloor heating
MFI (g/10 min)
12.5 (at 21.6 kg)
Density (g/cm3)
0.938
Type of polymer
High-density polyethylene (HDPE)
Special additives
Enhanced stabilization
Principal characteristics
PE-RT Type 1 PE80 class product
Segment
Flexible packaging;
Food products;
Industrial and shipping packaging;
Other goods
Processing Method
Extrusion
Areas of use
High-strength sleeve and laminated film
MFI (g/10 min)
1.0 (2.16 kg)
Density (g/cm3)
0.918
Type of polymer
Linear low-density polyethylene (LLDPE)
Special additives
Basic stabilization recipe with a processing additive
Principal characteristics
Basic grade, triple copolymer of ethylene with butene and hexene
Segment
Packaging for infusion solutions, blisters, polymer cans
Processing Method
Extrusion blow molding
Areas of use
Ampoules and vials for injection/infusion solutions produced using the BFS (blow-fill-seal) technology
MFI (g/10 min)
0.30 (2.16 kg)
Density (g/cm3)
0.927
Type of polymer
Low-density polyethylene (LDPE)
Special additives
No additives
Principal characteristics
High-density grade that allows sterilization at up to 110 °C. Compliance with the requirements of the European Pharmacopoeia
Segment
Packaging for infusion solutions, blisters, polymer cans
Processing Method
Extrusion blow molding
Areas of use
Containers, tank-type vehicle components
MFI (g/10 min)
0.30 (2.16 kg)
Density (g/cm3)
0.958
Type of polymer
High-density polyethylene (HDPE)
Special additives
No additives
Principal characteristics
Bimodal grade. Balanced stress-strain properties, good processability and high resistance to cracking
Segment
Medical containers
Processing Method
Injection molding
Areas of use
Сaps, lids medical
MFI (g/10 min)
1.5
Density (g/cm3)
0.955
Type of polymer
High-density polyethylene (HDPE)
Principal characteristics
Basic recipe
Modulus of elasticity in bending, not less than, MPa
ав
Segment
Packaging for infusion solutions, blisters, polymer cans
Processing Method
Extrusion
Areas of use
Lamination of paper, cardboard, aluminum foil, for food-grade and non-food-grade packaging
MFI (g/10 min)
7.5
Density (g/cm3)
0.921
Type of polymer
Low-density polyethylene (LDPE)
Special additives
No additives
Principal characteristics
Basic polyethylene grade for coating at high application rates. Reduced extractables. Improved rheological properties of products
Segment
Pipes
Processing Method
Extrusion
Areas of use
General-purpose pipes
MFI (g/10 min)
8.5 (at 21.6 kg)
Density (g/cm3)
0.949
Type of polymer
High-density polyethylene (HDPE)
Special additives
Enhanced stabilization
Principal characteristics
A bimodal product similar to PE100. Long service life, high hydrolytic strength.
Segment
Geosynthetics
Processing Method
Extrusion
Areas of use
Pressure pipes and fittings for domestic water supply and gas distribution networks
MFI (g/10 min)
0.18 (5 kg)
Density (g/cm3)
0.959
Type of polymer
High-density polyethylene (HDPE)
Special additives
Enhanced stabilization, UV stabilizer
Principal characteristics
A bimodal product of PE100 class. Long service life, high hydrolytic strength. UV resistant.
Segment
Beverages;
Rigid packaging
Processing Method
Injection molding
Areas of use
Food-grade and industrial containers, pallets, caps, dispensers
MFI (g/10 min)
5.0 (2.16 kg)
Density (g/cm3)
0.953
Type of polymer
High-density polyethylene (HDPE)
Special additives
Basic stabilization recipe
Principal characteristics
Increased resistance to cracking
Segment
Flexible packaging;
Industrial and shipping packaging;
Other goods
Processing Method
Extrusion
Areas of use
Mono- and multilayer sleeve films, such as general purpose films, FFS films, agricultural films, consumer packaging films, bags
MFI (g/10 min)
0.40 (2.16 kg)
Density (g/cm3)
0.935
Type of polymer
РЕ
Special additives
Basic stabilization recipe
Principal characteristics
Polymer compound containing 60% of the secondary fraction from consumer waste (PCR waste). The grade is characterized by high manufacturability. Color: transparent gray
Segment
Flexible packaging;
Transparent food-grade films;
Other goods
Processing Method
Extrusion
Areas of use
Shrink film, agricultural films, FFS films, films for consumer packaging
MFI (g/10 min)
0.30 (2.16 kg)
Density (g/cm3)
0.925
Type of polymer
РЕ
Special additives
Basic stabilization recipe
Principal characteristics
Polymer compound containing 70% of the secondary fraction from consumer waste (PCR waste). The grade is characterized by high manufacturability. Color: transparent gray
Segment
Cable insulation
Processing Method
Extrusion
Areas of use
Outer sheath of power and telecommunications cables, outer coating of gas, oil and water pipelines
MFI (g/10 min)
0.45-0.50
Density (g/cm3)
0.946-0.948
Type of polymer
High-density polyethylene (HDPE)
Principal characteristics
The product is characterized by increased resistance to cracking, high strength and impact properties, as well as low temperature characteristics.
Optimal solutions for partners
Leave
request
By pressing the button, I agree to the personal data processing policy