Roofing and waterproofing
Roofing and waterproofing
You can easily find the products you need by subcategories and using the navigation filter. Any product you want to download in PDF can be added by selecting it in the catalog.
Primary plasticizer
Segment
Roofing and waterproofing;
Cable insulation;
Floor coverings, wallpaper
Cable insulation;
Floor coverings, wallpaper
Areas of use
PVC floor coverings, vinyl wallpaper, stretch ceilings, decorative PVC films
Cable sheaths and insulation
PVC membranes
Benefits, in relation to segments/processing methods
Reduced volatility, increased frost resistance, dielectric and thermal stability
Mass fraction of volatile substances (%), NMT
≤ 0.10
Pt/Co colority (Hazen), under
≤ 15
Mass fraction of basic substance (%), NLT
≥ 99.0
Mass fraction of impurities (%), NMT (including water)
≤ 0.05 water
Open flash point (°C), NLT
≥ 220
Density at 20°С (g/cm³), range
0.981–0.987
Acid index (mg KOH/g)
≤ 0.03
Refraction index at 20°C
1.487–1.492
Specific volumetric electrical resistance at 30 °C (Ω·cm)
≥ 4*1011
Principal characteristics
Phthalate-free plasticizer, harmless to health, approved for all applications
SBS
Segment
Asphalt and bitumen;
Roofing and waterproofing
Roofing and waterproofing
Areas of use
Polymer-bitumen binder (PBB), mastics, sealants
Benefits, in relation to segments/processing methods
High asphalt concrete strength
Mass fraction of volatile substances (%), NMT
≤ 0.8
Bound styrene content (%)
28.5–31.5
Breaking elongation (%), NLT
≥ 700
Kinematic viscosity of 5.23% solution in toluene at temperature of (25 ±0.1) °C, cSt
14 ±5
Melt flow index, 190 °C/5 kgf (g/10 min)
< 1
Nominal tensile strength (MPa)
≥ 14.7
Elasticity modulus 300% (MPa)
≥ 2.7
Shore A hardness (c.u.)
72±5
Principal characteristics
High crack resistance, resistance to rutting, excellent manufacturability
Segment
Asphalt and bitumen;
Roofing and waterproofing
Roofing and waterproofing
Areas of use
Polymer-modified bitumen roofing and waterproofing materials
Benefits, in relation to segments/processing methods
High heat resistance
Mass fraction of volatile substances (%), NMT
≤ 0.8
Bound styrene content (%)
28.5–31.5
Breaking elongation (%), NLT
≥ 550
Kinematic viscosity of 5.23% solution in toluene at temperature of (25 ±0.1) °C, cSt
25 ±10
Melt flow index, 190 °C/5 kgf (g/10 min)
< 1
Nominal tensile strength (MPa)
≥ 8.0
Elasticity modulus 300% (MPa)
≥ 2.0
Shore A hardness (c.u.)
75 ±5
Principal characteristics
High frost resistance, stress-strain properties, manufacturability
Segment
Asphalt and bitumen;
Roofing and waterproofing
Roofing and waterproofing
Areas of use
Polymer-bitumen binder (PBB), mastics, sealants
Benefits, in relation to segments/processing methods
High asphalt concrete strength
Bound styrene content (%)
28.5–31.5
Breaking elongation (%), NLT
≥ 700
Kinematic viscosity of 5.23% solution in toluene at temperature of (25 ±0.1) °C, cSt
14 ±5
Melt flow index, 190 °C/5 kgf (g/10 min)
< 1
Nominal tensile strength (MPa)
≥ 14.7
Elasticity modulus 300% (MPa)
≥ 2.7
Shore A hardness (c.u.)
80 ±3
Principal characteristics
High crack resistance, resistance to rutting, excellent manufacturability
Mass fraction of calcium stearate (%), NMT
≤ 0.8
Segment
Roofing and waterproofing
Areas of use
Self-adhesive roofing and waterproofing materials
Benefits, in relation to segments/processing methods
Low viscosity, high stickiness and adhesion
Mass fraction of volatile substances (%), NMT
≤ 0.5
Bound styrene content (%)
32 ±1.5
Breaking elongation (%), NLT
≥ 600 (up to 1000–1100)
Melt flow index, 190 °C/5 kgf (g/10 min)
7.0 ±2.0
Nominal tensile strength (MPa)
≥ 3.0 (up to 4.0–4.5)
Shore A hardness (c.u.)
72–82
Principal characteristics
Produced without the use of BHT
Segment
Roofing and waterproofing
Areas of use
Self-adhesive roofing and waterproofing materials
Benefits, in relation to segments/processing methods
Low viscosity, high stickiness and adhesion
Mass fraction of volatile substances (%), NMT
≤ 0.5
Bound styrene content (%)
36.0–38.0
Breaking elongation (%), NLT
≥ 250
Melt flow index, 190 °C/5 kgf (g/10 min)
16.0–25.0
Nominal tensile strength (MPa)
≥1.7
Shore A hardness (c.u.)
80–92
Principal characteristics
High manufacturability, low viscosity; produced without the use of BHT
Additional parameters
Diblock copolymer content – 65-75%. Dynamic viscosity at 25 °C, 25% r-r in toluene — approx. 400 MPa °C