Packaging for infusion solutions, blisters, polymer cans
Packaging for infusion solutions, blisters, polymer cans
You can easily find the products you need by subcategories and using the navigation filter. Any product you want to download in PDF can be added by selecting it in the catalog.
Polyethylene
Segment
Rigid packaging;
Beverages;
Industrial and shipping packaging;
Packaging for infusion solutions, blisters, polymer cans
Beverages;
Industrial and shipping packaging;
Packaging for infusion solutions, blisters, polymer cans
Processing Method
Thermal molding
Areas of use
Food-grade and industrial containers, pallets, containers, boxes, caps
MFI (g/10 min)
4.5 (2.16 kg)
Density (g/cm3)
0.953
Type of polymer
High-density polyethylene (HDPE)
Special additives
UV stabilizer
Principal characteristics
Grade with a special recipe composition (UV)
Segment
Packaging for infusion solutions, blisters, polymer cans
Processing Method
Extrusion blow molding
Areas of use
Ampoules and vials for injection/infusion solutions produced using the BFS (blow-fill-seal) technology
MFI (g/10 min)
0.30 (2.16 kg)
Density (g/cm3)
0.927
Type of polymer
Low-density polyethylene (LDPE)
Special additives
No additives
Principal characteristics
High-density grade that allows sterilization at up to 110 °C. Compliance with the requirements of the European Pharmacopoeia
Segment
Packaging for infusion solutions, blisters, polymer cans
Processing Method
Extrusion blow molding
Areas of use
Containers, tank-type vehicle components
MFI (g/10 min)
0.30 (2.16 kg)
Density (g/cm3)
0.958
Type of polymer
High-density polyethylene (HDPE)
Special additives
No additives
Principal characteristics
Bimodal grade. Balanced stress-strain properties, good processability and high resistance to cracking
Segment
Packaging for infusion solutions, blisters, polymer cans
Processing Method
Extrusion
Areas of use
Lamination of paper, cardboard, aluminum foil, for food-grade and non-food-grade packaging
MFI (g/10 min)
7.5
Density (g/cm3)
0.921
Type of polymer
Low-density polyethylene (LDPE)
Special additives
No additives
Principal characteristics
Basic polyethylene grade for coating at high application rates. Reduced extractables. Improved rheological properties of products
PET
Segment
Packaging for infusion solutions, blisters, polymer cans
Processing Method
Injection molding
Areas of use
Vacuum tubes for blood collection, blister packs, containers for medicines
Inherent viscosity, dL/g
0,58 – 0,61
Melting point, C
246 – 255
Principal characteristics
High barrier polymer with high transparency