Cable insulation
Cable insulation
You can easily find the products you need by subcategories and using the navigation filter. Any product you want to download in PDF can be added by selecting it in the catalog.
Polyethylene
Segment
Cable insulation;
Geosynthetics
Geosynthetics
Processing Method
Extrusion
Areas of use
Overlay of sheaths - точно нормальный перевод?, protective covers of cables by extrusion
MFI (g/10 min)
0,30
Density (g/cm3)
0,921
Type of polymer
LDPE Low-density polyethylene (LDPE)
Special additives
Special formulation with enhanced thermal stability of the melt and increased resistance to thermal-oxidative degradation during product operation
Principal characteristics
The product is characterized by a special composition of the stabilization formula, which prevents the oxidation of the copper conductors of the product.
Segment
Cable insulation
Processing Method
Extrusion
Areas of use
Application of insulation, sheaths, protective covers of cables by extrusion
MFI (g/10 min)
0.30
Density (g/cm3)
0.919–0.922
Type of polymer
Low-density polyethylene (LDPE)
Special additives
A special recipe with enhanced thermal stability of the melt and increased resistance to thermal oxidative degradation during the product use
Principal characteristics
The product is characterized by a special composition of the stabilization recipe, with increased thermal oxidative stability.
Segment
Cable insulation
Processing Method
Extrusion
Areas of use
Application of insulation, sheaths, protective covers of cables by extrusion
MFI (g/10 min)
0.30
Type of polymer
Low-density polyethylene (LDPE)
Special additives
A special recipe with enhanced thermal stability of the melt and increased resistance to thermal oxidative degradation during the product use
Principal characteristics
The product is characterized by a special composition of the stabilization recipe, with increased thermal oxidative and photooxidative stability.
Segment
Cable insulation
Processing Method
Extrusion
Areas of use
Application of insulation, sheaths, protective covers of cables by extrusion
MFI (g/10 min)
0.3–0.65
Density (g/cm3)
0.950–0.955
Type of polymer
High-density polyethylene (HDPE)"
Special additives
A special recipe with enhanced thermal stability of the melt and increased resistance to thermal oxidative degradation during the product use
Principal characteristics
The product is characterized by a special composition of the stabilization recipe, with increased thermal oxidative stability.
Segment
Cable insulation
Processing Method
Extrusion
Areas of use
Outer sheath of power and telecommunications cables, outer coating of gas, oil and water pipelines
MFI (g/10 min)
0.45-0.50
Density (g/cm3)
0.946-0.948
Type of polymer
High-density polyethylene (HDPE)
Principal characteristics
The product is characterized by increased resistance to cracking, high strength and impact properties, as well as low temperature characteristics.
Primary plasticizer
Segment
Roofing and waterproofing;
Cable insulation;
Floor coverings, wallpaper
Cable insulation;
Floor coverings, wallpaper
Areas of use
PVC floor coverings, vinyl wallpaper, stretch ceilings, decorative PVC films
Cable sheaths and insulation
PVC membranes
Benefits, in relation to segments/processing methods
Reduced volatility, increased frost resistance, dielectric and thermal stability
Mass fraction of volatile substances (%), NMT
≤ 0.10
Pt/Co colority (Hazen), under
≤ 15
Mass fraction of basic substance (%), NLT
≥ 99.0
Mass fraction of impurities (%), NMT (including water)
≤ 0.05 water
Open flash point (°C), NLT
≥ 220
Density at 20°С (g/cm³), range
0.981–0.987
Acid index (mg KOH/g)
≤ 0.03
Refraction index at 20°C
1.487–1.492
Specific volumetric electrical resistance at 30 °C (Ω·cm)
≥ 4*1011
Principal characteristics
Phthalate-free plasticizer, harmless to health, approved for all applications